Battery Operated

Carbon Monoxide Alarm

Architectural and Engineering Specifications

The carbon monoxide alarm shall be Kidde Unit Number KN-COB-B (part number 9CO5) or approved equal. It shall be powered by three

(3)AA batteries (included). The unit shall have a snap open cover that allows immediate access to batteries. The temperature operating range shall be between 40˚F and 100˚F (4˚C and 38˚C) and the humid- ity operating range shall be 5% - 95% relative humidity.

The CO sensor shall be of a fuel cell design and shall meet the sensitivity requirements of Underwriters Laboratories UL2034 Single and Multiple Station Carbon Monoxide Alarms.

The alarm can be installed on the surface of any wall or ceiling following the UL/NFPA/Manufacturer’s recommended placement guidelines. The alarm shall include a battery lockout system that deters closure of battery door without using three batteries.

The alarm shall include a test button that will electronically simu- late the presence of CO and cause the unit to go into alarm. This sequence tests the unit’s electronics to ensure proper operation.

Per UL 2034 requirements, the CO sensor will not alarm to levels of CO below 30 ppm and will alarm in the following time range when exposed to the corresponding levels of CO.

70 ppm CO Concentration

60 – 240 minutes

150 ppm CO Concentration

10 – 50 minutes

400 ppm CO Concentration

4 – 15 minutes

The unit shall incorporate 2 LED’s. A green LED will flash once every 30 seconds to indicate the alarm is operating properly when power is present. A red LED will pulse to to indicate carbon monoxide has been detected until the device is reset or CO is eliminated.

The alarm shall include a piezoelectric horn that is rated at 85 decibels at 10 feet. When the unit detects carbon monoxide, the alarm pattern will be four (4) short beeps – followed by five (5) seconds of silence – followed by four (4) short beeps with a corresponding red LED flash.

It shall also include a 5-year manufacturer’s limited warranty.

Part Number 21008905

Model 9CO5-LP

Technical Specifications

Power Source:

3 AA Batteries

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Sensor:

Electrochemical

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Audio Alarm:

85dB at 10ft

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Temperature Range:

40˚F (4.4˚C) to 100˚F (37.8˚C)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Humidity Range:

5%-95% relative humidity (RH)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Size:

4.5”L x 2.75”H x 1.5” D

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Weight:

.5lb

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Wiring:

None

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Interconnects:

No

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Warranty:

5 year limited

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4.5”

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1.5”

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2.75”

Ordering Information

Clamshell UPC: 0-47871-08905-5

Bulk UPC: 0-47871-08908-5

 

 

Part

 

 

 

Dimensions

 

Case/

Number

I 2 of 5

Pack Quantity

(w x d x h inches)

Weight

Skid

 

 

 

 

 

 

21008905

100-47871-08905-2

Cut Case (4 units)

8 x 9.5 x 11.5

3.5lb

72

 

 

 

 

 

 

21008908

100-47871-08908-3

Bulk Pack (6 units)

6.4 x 12.2 x 6.8

3.9lb

105

 

 

 

 

 

 

 

**Not for sale by individual unit

1016 Corporate Park Drive Mebane NC 27302 1-800-880-6788 www.Kidde.com

Distributed by:

KL-9CO5-LP sheet

rev. 03-2011

Page 2
Image 2
Kidde 9CO5-LP warranty Architectural and Engineering Specifications, Technical Specifications, Ordering Information

9CO5-LP specifications

The Kidde 9CO5-LP is a state-of-the-art carbon monoxide alarm that combines advanced technology with user-friendly features, ensuring safety and peace of mind in residential settings. One of its standout characteristics is its sleek design, allowing it to blend seamlessly with any home decor while providing essential safety monitoring.

At the heart of the Kidde 9CO5-LP is its highly sensitive electrochemical sensor, which is designed to detect low levels of carbon monoxide effectively. Carbon monoxide is an odorless, colorless gas that can pose serious health risks, making reliable detection crucial. This model can provide early warnings, alerting users to potentially dangerous concentrations of CO in the air, thus helping prevent carbon monoxide poisoning.

The Kidde 9CO5-LP comes equipped with a digital display that provides real-time feedback and ensures users are aware of the current CO levels in their environment. The easy-to-read screen shows the CO concentration in parts per million (ppm), giving homeowners the information they need at a glance. Additionally, the unit features a peak level memory function, which records the highest level of CO detected since the last reset, providing insights into any past exposure.

A notable feature of the Kidde 9CO5-LP is its 85-decibel alarm, which sounds to alert residents to dangerous CO levels. The loud alarm ensures that even in noisy households, the warning can be heard. In addition, this alarm integrates a test/reset button, allowing users to check the functionality of the device easily.

This model also operates on two AA batteries, ensuring that it remains functional even during power outages. The battery compartment is easily accessible, allowing users to change batteries without the need for tools. Furthermore, the Kidde 9CO5-LP features a low battery indicator that alerts users when it’s time to replace the batteries.

In terms of installation, the Kidde 9CO5-LP is designed for versatility. It can be mounted on the wall or placed on a shelf or tabletop, making it suitable for various rooms in the house such as bedrooms, living rooms, and hallways. Its compact design means it won’t take up much space while still providing vital safety capabilities.

In conclusion, the Kidde 9CO5-LP carbon monoxide alarm combines advanced sensing technology, user-friendly features, and a design that fits effortlessly into any home. With its reliable monitoring capabilities, this unit serves as an essential component of home safety, providing families with crucial protection against the dangers of carbon monoxide.