120V AC/DC Wire-in Smoke Alarm

Part# 21006376

Front Battery Door

Model i12060

 

 

Architectural and Engineering Specifications

The smoke alarm shall be Kidde Model i12060 or approved equal. It shall be powered by a 120VAC, 60Hz source along with a 9V battery backup. The unit shall incorporate an ionization sensor with nominal sensitivity of 0.50 to 1.06%/ft. The temperature operating range shall be between 40°F and 100°F (4°C and 38°C) and the humidity operating range shall be 5% - 95% relative humidity.

The smoke alarm can be installed on any standard single gang electrical box, up to a 4” octagon junction box. The electrical connection (to the alarm) shall be made with a plug-in connector. A maximum of 24 Kidde devices can be interconnected in a multiple station arrange- ment. The interconnect system must not exceed the NFPA (National Fire Protection Association) limit of 18 initiating devices, of which 12 can be smoke alarms. With 18 initiating devices (Smoke, heat, CO, etc), interconnected, it is still possible to interconnect 6 strobe lights and/or relay modules. The alarm shall provide optional tamper resistance that deters removal of the unit from the wall or ceiling and locks the battery door closed. No additional pieces shall be required to activate this feature.

The alarm shall include an easy access battery compartment that is opened and closed by pressing on the battery door. The 9V battery carrier will ensure proper battery backup protection by not allowing the battery door to close if the battery is placed in the unit incorrectly or if a battery is not present. The unit shall also provide an optional tamper resistant switch that will prevent the battery door from being opened.

The unit shall include a piezoelectric horn that is rated at 85 decibels at 10 feet. The unit shall include the Smart HushTM feature that silences the unit for approximately 7 minutes if a nuisance condition occurs.

The unit shall incorporate red and green LED indicators. The green LED (when illuminated) indicates the presence of AC power. The red LED (located under the TEST/Hush button) has four modes of operation:

Standby Condition: The red LED will flash every 30-40 seconds to indicate that the smoke alarm is operating properly. Alarm Condition: When the alarm senses products of combustion and goes into alarm the red LED will flash one flash per second. The flashing LED and pulsating alarm will continue until the air is cleared.When units are interconnected, only the red LED of the alarm that senses the smoke or is being tested (the originating unit) will flash. All other units in the interconnected system will sound an alarm but their red LED’s will NOT flash. Alarm Memory: This smoke alarm is equipped with an alarm memory, which provides a visual indication when an alarm has been activated. The red LED will illuminate for about 1.5 seconds every 16 seconds to indicate the memory condition. Smart HushTM Mode: The red LED will illuminate for 1.5 seconds every 8 seconds, indicating the smoke alarm is in the Smart HushTM Mode.

The unit shall at a minimum meet the requirements of UL217, NFPA72, and (chapter 11), The State of California Fire Marshall, NFPA101 (0ne and two family dwellings), Federal Housing Authority (FHA), Housing and Urban Development (HUD).

Installation of Smoke Alarm

The smoke alarm should be installed to comply with all local codes having jurisdiction in your area, Article 760 of the National Electric Code, and NFPA 72. Make certain all alarms are wired to a single, continuous (non-switched) power line, which is not pro- tected by a ground fault interrupter. A maximum of 1000 ft. of wire can be used in the interconnect system. Use standard UL listed household wire as required by code.

FUSE OR CIRCUIT BREAKER

L

N

BLACK

RED

WHITE

 

First

Additional

Alarm

Alarms

Technical Specifications

Model:

i12060

Power Source:

120VAC (80mA), 60HZ, 9V battery backup

Audio Alarm:

85dB at 10ft

Temperature Range:

40˚F to 100˚F (4˚C to38˚C)

Humidity Range:

5%-95% relative humidity (RH)

Sensor:

Ionization

Size:

5” in diameter x 1.75” depth

Weight:

.5lbs

Interconnects:

Up to 24 Kidde devices

LED:

Green, receiving AC power

 

Red, 4 modes of operation

Warranty:

10 year limited warranty

Ordering Information

Ordering

 

 

 

Dimensions

 

Case/

Layers/

Skid

Number

UPC

I2F5

Pack Quantity

(w x d x h inches)

Weight

Skid

Skid

Weight

 

 

 

 

 

 

 

 

N/A

7-84908-00135-1 N/A

individual*

5.75 x 1.5 x 5.75

0.5 lbs

N/A

N/A

N/A

 

 

 

 

 

 

 

 

21006376

7-84908-00135-1 107-84908-00135-8

Cut Case (6 units)

6.5 x 13.25 x 6

3 lbs

147

7

441 lbs

 

 

 

 

 

 

 

 

21005927

0-47871-05927-0 200-47871-05927-4

Bulk Pack (6 units)

6 x 10.5 x 6

3 lbs

147

7

441 lbs

 

 

 

 

 

 

 

 

21006932

7-84908-00135-1 407-84908-00135-9

Bulk Pack (36 units)

19.5 x 11.75 x 12

18 lbs

24

4

432 lbs.

 

 

 

 

 

 

 

 

 

21006933

7-84908-00135-1

307-84908-00135-2

Display Pallet (36 units)

20 x 24 x 40

20 lbs.

4

1

90 lbs.

 

 

 

 

 

 

 

 

 

21005928

0-47871-27689-9

100-47871-27689-6

Cut Case (3 Twin Packs)

6.5 x 13.25 x 6

3 lbs

147

7

441 lbs

 

 

 

 

 

 

 

 

 

Alk. Btry 21006931

0-47871-27695-0

100-47871-27695-7

Cut Case (6 units)

6.5 x 13.25 x 6

3 lbs

147

7

441 lbs

*Not for sale by individual unit

1016 Corporate Park Drive Mebane NC 27302 1-800-880-6788 www.Kidde.com

Distributed by:

P/N: KL-i12060 sheet

rev. 01-2009

Page 2
Image 2
Kidde i12060 warranty Architectural and Engineering Specifications, Installation of Smoke Alarm, Technical Specifications

i12060 specifications

The Kidde i12060 is a user-friendly, advanced smoke alarm that embodies safety and innovation in residential fire prevention. Designed to protect homes and families, it utilizes a variety of modern features and technologies to ensure early detection of smoke, providing crucial time for residents to escape in the event of a fire.

One of the main features of the Kidde i12060 is its 120V AC power source with a battery backup. This dual power option ensures that the alarm remains operational even during power outages, delivering peace of mind to homeowners. The backup battery can be easily replaced, ensuring the alarm's functionality is always maintained.

The unit is equipped with a photoelectric sensor, which is particularly effective at detecting smoldering fires that might produce more smoke than heat. Unlike traditional ionization detectors, photoelectric sensors reduce false alarms caused by cooking or other non-threatening activities. This technology is critical for maintaining a hassle-free living environment while still ensuring optimum safety.

Another standout feature is the Smart Hush™ technology, which allows users to temporarily silence the alarm in the event of a non-emergency situation, such as a false alarm triggered by steam or cooking smoke. This reduces the likelihood of disruption while still allowing the alarm to maintain its readiness.

The Kidde i12060 also incorporates a loud 85-decibel alarm, which is designed to alert everyone in the household, even those who may be hard of hearing. The alarm can easily be mounted on walls or ceilings, facilitating flexible installation based on the layout of the home.

Additionally, the smoke alarm comes with a test/reset button that enables users to quickly check the unit's functionality and reset it after an alarm or false alarm situation. The LED indicator light provides a visual cue of the alarm’s status, ensuring users are well-informed about its condition.

With its sleek design, the Kidde i12060 complements various home aesthetics while prioritizing safety and reliability. The device is UL-listed, ensuring it meets rigorous safety standards set by Underwriters Laboratories, which is essential for consumer confidence.

In summary, the Kidde i12060 smoke alarm merges effective detection technologies with user-friendly features, making it an essential component of any home safety plan. Featuring a reliable power source, advanced sensor technology, and intuitive functions, it stands out as a trusted device for protecting families from fire hazards.