AC Powered, Plug-In

Carbon Monoxide Alarm

Architectural and Engineering Specifications

The carbon monoxide alarm shall be Kidde Unit Number KN-COP- DP (part number 900-0056) or approved equal. It shall be powered by a 120VAC, 60 Hz source. The temperature operating range shall be between 40˚F and 100˚F (4˚C and 38˚C) and the humidity opera- tion range shall be 5% - 95% relative humidity.

The CO sensor shall be of a fuel cell design and shall meet the sensitivity requirements of Underwriters Laboratories UL 2034 Single Station Carbon Monoxide Detectors. The unit shall provide accura- cy of +/-20% + 15 parts per million (ppm) when reading CO con- centration levels.

The alarm shall include an attached plug that can be installed in any outlet following the UL/NFPA/Manufacturer’s recommended guidelines. The plug shall be capable of being rotated so the alarm remains vertical independent of whether the electrical socket is mounted vertically or horizontally.

The unit shall incorporate a digital display that meets the sensi- tivity requirements of UL 2034. The display will identify the levels of CO in parts per million (ppm) once that level reaches 30ppm (i.e.:

“abnormal” levels). The display will have a red dot in the lower right corner that will blink to indicate the normal operation.

The alarm shall include a test button that will electronically simulate the presence of CO and cause the unit to go into alarm. This sequence tests the unit’s electronics to ensure proper operation.

The CO sensor will not alarm to levels of CO below 30 ppm and will alarm in the following time range when exposed to the corresponding level of CO.

The alarm shall include a piezoelectric horn that is rated at 85 decibels at 10 feet. When the unit detects carbon monoxide, the alarm pattern will be four (4) short beeps – followed by five (5) seconds of silence – followed by four (4) short beeps. A number reading will appear on the digital display identifying the CO concentration (in ppm).

*Based on accuracy claims of major manufacturers

Part Number 900-0056

Unit Number KN-COP-DP

The unit shall include a peak level memory feature that will store the peak CO level sensed since the unit was last reset. The peak CO level stored in the unit’s memory shall be displayed (in ppm) on the digital display by pressing the appropriate button on the unit. The memory shall also be capable of being reset.

The unit shall be listed to UL 2034. It shall also include a 5-year manufacturer’s limited warranty.

Technical Specifications

Part Number:

900-0056

 

 

 

 

 

Unit Number:

KN-COP-DP

 

 

 

 

 

 

 

 

 

 

 

 

 

 

UPC Number:

7-84608-00560-1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Power Source:

120VAC

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Sensor:

Electrochemical

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Audio Alarm:

85dB at 10ft

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Temperature Range:

40˚F (4.4˚C) to 100˚F (37.8˚C)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Humidity Range:

Up to 95% relative humidity (RH)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Size:

5.65”L x 3.25”W x 1.9”H

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Weight:

1lb

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Interconnects:

No

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Wiring:

Plug-In

LED:

Displays CO concentration in PPM

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Warranty:

5 year limited

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3.25"

 

 

 

 

1.9"

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

5.65"

Ordering Information

Clam Shell UPC: 7-84908-00560-1

Part

 

 

Dimensions

 

Case/

Layers/

Skid

Number

I 2 of 5

Pack Quantity

(w x d x h inches)

Weight

Skid

Skid

Weight

 

 

 

 

 

 

 

 

900-0056**

N/A

Individual

7 x 2.5 x 10.75

1lb

N/A

N/A

N/A

 

 

 

 

 

 

 

 

900-0056-02

107 84908 00560 8

PDQ (2 units)

7.75 x 6 x 11.75

2lbs

105

3

210lbs

 

 

 

 

 

 

 

 

900-0056-07

207 84908 00560 5

Master Pack (4 units)

7.75 x 11.5 x 12

4lbs

80

4

320lbs

 

 

 

 

 

 

 

 

900-0056-012

307 84908 00560 2

Cut Case (12 units)

15 x 18 x 12

12lbs

18

3

216lbs

 

 

 

 

 

 

 

 

900-0056-036

407 84908 00560 9

Power Tower (36 units)

20 x 24 x 50 (incl. pallet)

36lbs

3

3

108lbs

 

 

 

 

 

 

 

 

**Not for sale by individual unit

1

2

4

12

36

UNIT

PDQ

MASTER PACK

CUT CASE

POWER TOWER

Distributed by:

1394 South Third Street, Mebane NC 27302

1-800-880-6788 • www.kiddeus.com

Page 2
Image 2
Kidde KN-COP-DP warranty Architectural and Engineering Specifications, Technical Specifications, Ordering Information

KN-COP-DP specifications

The Kidde KN-COP-DP is a cutting-edge combination carbon monoxide (CO) and explosive gas detector designed to enhance home safety. With its advanced technology and user-friendly features, this device plays a crucial role in preventing potentially life-threatening situations due to carbon monoxide poisoning and gas leaks.

One of the standout features of the Kidde KN-COP-DP is its dual-sensor capability. This device combines the detection abilities for both carbon monoxide and explosive gases, such as natural gas and propane, into a single unit. This dual function not only saves space but also provides a comprehensive safety solution for homeowners who want to protect their families from multiple hazards.

The KN-COP-DP utilizes an electrochemical sensor for carbon monoxide detection. This sensor is known for its high sensitivity and reliability, enabling it to detect low levels of CO gas quickly. The alarm will sound when CO levels reach the hazardous threshold, alerting occupants to the danger. In addition, the unit has a sensitivity level designed to accurately detect dangerous concentrations of CO while minimizing false alarms due to harmless levels associated with common household activities, like cooking.

For detecting explosive gases, the Kidde KN-COP-DP is equipped with a catalytic sensor. This technology is extremely effective for identifying the presence of flammable gases, ensuring that if there is a leak in your home, you will be alerted promptly. The device provides peace of mind by continuously monitoring the air in your living space for any signs of danger.

Another notable feature is the digital display on the KN-COP-DP, which provides real-time information on CO levels and the status of the unit. This display enhances user convenience, allowing homeowners to understand their environment better and take preventive measures as needed. Furthermore, the device includes a test/reset button that allows users to easily verify the unit’s functionality.

The Kidde KN-COP-DP is also designed with user safety and convenience in mind. It has a battery back-up system that ensures continued operation during power outages. Additionally, the sleek and compact design allows for easy installation in any room, whether it be a kitchen, living room, or bedroom.

In conclusion, the Kidde KN-COP-DP is an essential device for enhancing home safety. With its innovative features, reliable sensors, and user-friendly interface, it provides comprehensive protection against the dual threats of carbon monoxide and explosive gases, ensuring the well-being of you and your loved ones.