Kidde KN-COPP-B-LS Architectural and Engineering Specifications, Technical Specifications, Part

Models: KN-COPP-B-LS

1 2
Download 2 pages 29.1 Kb
Page 2
Image 2
Nighthawk Carbon Monoxide Alarm

Nighthawk Carbon Monoxide Alarm

Part Number 900-0230

Battery Operated with Digital Display
Model KN-COPP-B-LS

 

 

Architectural and Engineering Specifications

The carbon monoxide alarm shall be Kidde Model KN-COPP-B- LS (part number 900-0230) or approved equal. It shall be powered by three (3) AA batteries (included). The temperature operating range shall be between 40°F and 100°F (4°C and 38°C) and the humidity operating range shall be 10% - 95% relative humidity.

The CO sensor shall be of a fuel cell design and shall meet the sensitivity requirements of Underwriters Laboratories UL2034 Single and Multiple Station Carbon Monoxide Alarms.

The alarm can be installed on the surface of any wall or table top following the UL/Manufacturer’s recommended placement guidelines. The alarm shall include a battery lockout system that deters closure of battery door without batteries being installed.

The unit shall incorporate a digital display that meets the sensi- tivity requirements of UL 2034. The display will identify the levels of CO in parts per million (ppm) once that level reaches 30ppm (i.e.: “abnormal” levels).

The alarm shall include a test button that will electronically simulate the presence of CO and cause the unit to go into alarm. This sequence tests the unit’s electronics to ensure proper opera- tion. Per UL 2034 requirements, the CO sensor will not alarm to levels of CO below 30 ppm and will alarm in the following time range when exposed to the corresponding levels of CO.

70 ppm CO concentration 60 – 240 minutes

150 ppm CO concentration 10 – 50 minutes

400 ppm CO concentration 4 – 15 minutes

The unit shall incorporate 2 LED’s. A green LED will flash once every 30 seconds to indicate the alarm is operating properly when power is present. A red LED will pulse to indicate carbon monoxide has been detected until the device is reset or CO is eliminated.

*Based on accuracy claims of major manufacturers

Technical Specifications

Part Number:

900-0230

Model:

KN-COPP-B-LS

Power Source:

3 AA BATTERIES

Sensor:

Electrochemical

Audio Alarm:

85dB at 10ft

Temperature Range:

40˚F (4.4˚C) to 100˚F (37.8˚C)

Humidity Range:

10%-95% relative humidity (RH)

Size:

3.0” x 5.0” x 1.5”

Weight:

.44 lbs with battery

Interconnects:

No

Warranty:

7 year limited

 

 

 

 

 

 

Ordering Information

Clamshell UPC: 0-47871-07267-5

Part

 

 

Dimensions

 

Case/Skid
NumberI 2 of 5Pack Quantity(w x d x h inches)Weight

Skid

Weight

 

 

 

 

 

 

 

900-0230**

N/A

Individual (Clam)

7.5 x 2 x 11

1.25 lbs.

N/A

N/A

 

 

 

 

 

 

 

21007267

100-47871-07267-2

Cutcase (4 units) Clam

7.94 x 11.5 x 11.25

5 lbs.

60

300

 

 

 

 

 

 

 

21007333

200-47871-07267-9

Cutcase (8 units) Clam

7.94 x 21.63 x 11.5

10 lbs.

36

360

**Not for sale by individual unit

1016 Corporate Park Drive, Mebane NC 27302

1-800-880-6788 www.kidde.com

Distributed by:

Page 2
Image 2
Kidde KN-COPP-B-LS Architectural and Engineering Specifications, Technical Specifications, Ordering Information, Part