Battery Operated Combination Carbon Monoxide & Smoke Alarm
• Part Number 900-0102 • KN-COSM-B
Talking Alarm
Announces the hazard type detected.
Test/Reset Button
Tests alarm circuitry and triggers the voice announcement.
Combined Carbon Monoxide and Smoke Alarm
A single unit can be installed where previously, two were needed. Reduces installation time and helps to keep home décor attractive.
LEDs
Two LEDs are provided. Flashing green for normal operation and flashing red for alarm condition.
NEW Alerts user to replace CO alarm
FEATURE: after 7 years of operation
NIGHTHAWKTM
TECHNOLOGY
World’s Most Accurate
Carbon Monoxide Alarm*
Description
The Kidde
family of a smoke or carbon monoxide danger, or if your battery is in need of replacement. This technically advanced combination alarm is battery operated protecting you and your family even during a power outage when many incidences occur. The
Alarm Warnings
Fire: The red LED will flash and be accompanied by three long alarm beeps followed by a verbal warning message “FIRE! FIRE!”. The alarm will repeat pattern until smoke is eliminated.
Carbon Monoxide: Four short alarm beeps followed by a verbal warning “WARNING! CARBON MONOXIDE!” This continues until the unit is reset or the CO is eliminated.
Low Battery: One chirp followed by warning “LOW BATTERY”. The red LED light will flash. This pattern will continue every minute for the first hour. After the first hour the red LED light will flash once every minute accompanied by the chirp sound. The “LOW BATTERY” warning will only sound once every fifteen minutes.
Voice Hush Indication: “HUSH ACTIVATED” and “HUSH CANCELLED” voice announcement.
Peak Level Memory: If the alarm had detected a CO level of 100ppm or higher, the unit will announce “CO PREVIOUSLY DETECTED” to warn of the CO incident, when the Test/Reset but- ton is pressed.
*Based on accuracy claims of major manufacturers
Features and Benefits
•Talking Alarm – Announces the hazard type detected thereby helping to speed up the correct reaction to the hazard detected. Alarm announces “Fire Fire” when a smoke or fire hazard is detected and announces “Warning Carbon Monoxide” when a CO hazard is detected.
•Combined Carbon Monoxide and Smoke Alarm – A single unit can be installed where previously, two were needed. Reduces installation time and helps to keep home décor attractive.
•Test/Reset Button – Tests alarm circuitry and triggers the voice announcement.
•LEDs – Two LEDs are provided. Flashing green for normal operation and flashing red for alarm condition.
•Low Battery Warning – The unit warns of a low battery condition by announcing “low battery” and by initiating an alarm chirp and activating a flashing red LED.
•Battery Powered – Provides protection even during power outages when many fire and carbon monoxide incidents occur.
•Battery Safeguard – Ensures the unit cannot be accidentally mounted without batteries installed.