Kidde Architectural and Engineering Specifications, Technical Specifications, Model PE9

Models: PE9

1 2
Download 2 pages 51.81 Kb
Page 2
Image 2
Battery Powered Photoelectric Smoke Alarm

Battery Powered Photoelectric Smoke Alarm

Architectural and Engineering Specifications

The smoke alarm shall be Kidde Model PE9 or approved equal. It shall be powered by a 9V battery. The unit shall incorporate an photoelectric sensor with nominal sensitivity of 2.06%/ft. The tem- perature operation range shall be between 40°F and 100°F (4°C and 38°C) and the humidity operation range shall be 5% - 95% relative humidity.

The unit shall provide optional tamper resistance that helps deter removal of the unit from the wall or ceiling. The alarm shall include a test button that will electronically simulate the presence of smoke and cause the unit to go into alarm. This sequence tests the unit’s electronics, battery and horn to ensure proper operation. The unit shall include a piezoelectric horn that is rated at 85dB at 10 feet. The unit shall also include a low battery warning utilizing a brief alarm chirp every 30-40 seconds along brief flashed from the safety light for a minimum of seven (7) days.

The unit shall incorporate one red LED to indicate the alarm’s current status and mode of operation. The red LED will indicate one of two conditions:

Standby Condition: The red LED will flash every 30-40 seconds to indicate that the smoke alarm is operating properly.

Alarm Condition: When the alarm senses products of combustion and goes into alarm, the red LED will flash rapidly (one flash per second). The rapid flashing LED and pulsating alarm will continue until the air is cleared.

The unit shall at a minimum meet the requirements of UL217, NFPA72, (chapter 11 2002 edition), The State of California Fire Marshall, NFPA 101 (One and two family dwellings) Federal Housing Authority (FHA), Housing and Urban Development (HUD). It shall also include a 5-year manufacture’s limited warranty.

Model PE9

Technical Specifications

UPC:

0-25417-16509-8

 

 

 

 

 

Power Source:

9V Battery (included)

 

 

 

 

 

 

 

 

 

 

 

 

 

Audio Alarm:

85dB at 10ft

 

 

 

 

 

 

 

 

 

 

 

 

 

Temperature Range:

40˚F to 100˚F (4˚C to 38˚C)

 

 

 

 

 

 

 

 

 

 

 

 

 

Humidity Range:

5%-95% relative humidity (RH)

 

 

 

 

 

 

 

 

 

 

 

 

 

Sensor:

Photoelectric

 

 

 

 

 

 

 

 

 

 

 

 

 

Size:

5” in diameter x 1.5” depth

 

 

 

 

 

 

 

 

 

 

 

 

 

Weight:

.8lbs

 

 

 

 

 

 

 

 

 

 

 

 

 

Interconnects:

No

LED:

Red, normal operation

 

 

 

 

 

 

 

 

 

 

 

 

 

Warranty:

5 year limited

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

5"

 

 

 

 

 

 

1.5"

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Ordering Information

Gift Box UPC:

0-25417-16509-8

 

 

 

 

 

 

Part

 

 

Dimensions

 

Case/

Layers/

Skid

Number

I 2 of 5

Pack Quantity

(w x d x h inches)

Weight

Skid

Skid

Weight

 

 

 

 

 

 

 

 

PE9**

N/A

Individual

5.2 x 1.5 x 5.2

1lb

N/A

N/A

N/A

 

 

 

 

 

 

 

 

PE9E

20025417165092

Master Pack (12 units)

10.75 x 10.75x 5.5

12lbs

128

16

1635lbs

 

 

 

 

 

 

 

**Not for sale by individual unit

 

 

 

 

 

 

 

 

 

 

 

 

1

12

 

 

 

 

 

 

UNIT

MASTER PACK

Distributed by:

1394 South Third Street, Mebane NC 27302

1-800-880-6788 • www.kiddeus.com

Page 2
Image 2
Kidde warranty Architectural and Engineering Specifications, Technical Specifications, Ordering Information, Model PE9