Manuals / Kidde / Household Appliance / Smoke Alarm

Kidde PI9000CA manual Cleaning the Alarm

Models: PI9000CA

1 20
Download 20 pages 19.39 Kb
Page 15
Image 15

Maintenance

After installing or changing the battery, reinstall your alarm and test your alarm by using the test button.

WARNING! Use only the batteries specified above. Use of different batteries than the recommended ones, may have a detrimental effect on the smoke alarm. A good safety measure is to replace the battery at least once a year, or at the same time you change your clocks for daylight saving time. Be sure to follow the battery installation instructions printed on the back of the alarm.

NOTE: WEEKLY TESTING IS REQUIRED!

NOTE: If after battery replacement the alarm continues to chirp, push the Test button. The Hush® feature may have been activated accidently while changing the battery and pushing the Test button will end the Hush® cycle.

Cleaning the Alarm

The alarm should be cleaned at least once a year.

•To clean your alarm, remove it from the mounting plate as outlined in previous sections. You can clean the alarm by using compressed air or a vacuum cleaner hose with a soft brush attachment. Blow or vacuum around the perimeter of the alarm to remove dust and dirt. The outside of the alarm can be wiped with a damp cloth (do not use a wet cloth to avoid water entering the unit).

•After cleaning, reinstall your alarm and test your alarm by using the Test button. If cleaning does not restore the alarm to normal operation, the alarm should be replaced.

•Do not paint the unit. Paint will seal the vents and interfere with the sensor’s ability to detect smoke. Never attempt to disassemble the unit or clean inside. This action will void your warranty.

Replacing the Alarm

The National Fire Protection Association (NFPA) and Kidde recommend replacing this alarm ten years from the date code label (located on the back of the alarm).

14

Page 14 Page 16
Page 15
Image 15
Kidde PI9000CA manual Cleaning the Alarm
Page 14 Page 16

PI9000CA specifications

The Kidde PI9000CA is a highly advanced smoke and carbon monoxide detector designed for residential safety. Combining cutting-edge technology with user-friendly features, this device offers comprehensive protection against the dual threats of smoke and lethal carbon monoxide gas.

One of the standout features of the Kidde PI9000CA is its dual-sensor technology. It employs both photoelectric and ionization sensing technologies, allowing it to detect a wide range of fire types. Photoelectric sensors are particularly effective for smoldering fires, which produce more smoke and less flame, while ionization sensors are better at detecting fast-flaming fires. This dual approach significantly enhances the unit's overall detection capabilities, ensuring quicker alerts and potentially saving lives.

Additionally, the PI9000CA is equipped with a voice alarm feature that clearly announces the type of danger detected. This intuitive feature helps occupants quickly identify whether there is smoke or carbon monoxide in the environment, allowing for a faster and more informed response. Audible alarms are accompanied by a loud 85-decibel alert, ensuring that the warnings can be heard throughout the home.

Another notable characteristic of the Kidde PI9000CA is its battery backup system. While it can be hardwired into the household electrical system, it also includes a battery backup to ensure continued operation during power outages. This is critical for maintaining safety in unexpected situations.

The design of the Kidde PI9000CA is also user-friendly. It features a sleek and modern look that seamlessly integrates into home décor. The easy-to-read display shows battery status and alert conditions, simplifying maintenance and monitoring for homeowners.

Installation is another area where the Kidde PI9000CA excels. The unit is designed for quick and straightforward installation, making it accessible for homeowners without extensive DIY experience. Furthermore, it meets all relevant safety standards and certifications, making it a trusted choice among safety-conscious users.

The Kidde PI9000CA also features a test/reset button, allowing users to regularly check the functionality of the detector. Regular testing is crucial for ensuring that the device operates correctly, keeping families safe from the risks associated with smoke and carbon monoxide exposure.

In summary, the Kidde PI9000CA is a robust smoke and carbon monoxide detector integrating advanced dual-sensor technology, a clear voice alarm, battery backup, and easy installation. Its user-friendly design and reliable performance make it an essential part of any home safety plan, guaranteeing that families are protected around the clock.