LUBRICATION
Before using the seeder for the first time, put at least (35 shots with a hand grease gun) of grease in zerk shown below. After every 8 hours of use put in (3 to 4 shots with a hand grease gun).
Make sure the grease zerks are clean from dirt and other foreign materials before injecting the grease.
NOTE: Use only a grade Type II or Lithium tube grease.
POINT TO GREASE
REPLACEMENT OF THE SPREADER VANES
In case the spreader vanes of the disc brake or get damaged, it will be neces- sary to replace them with new ones.
Unscrew the nut and replace the damaged vane. The nuts and bolts you remove, if not damaged may be reused. If they are damaged or worn replace them with the same type and size nuts and bolts.
24
