The ‘Remote Password Reset’ is a feature in SafeConsole that allows DT4000-M users to change/create passwords without resetting the device, thus saving all data stored on the DT4000-M. The ‘Forgot Password’ menu option is available on the DT4000-M ONLY when ‘Remote Password Reset’ is enabled on the SafeConsole Management Server (consult your helpdesk or administrator for details.)
(Note: Remote Password Reset needs to be enabled on the SafeConsole Management Server PRIOR to initializing the DT4000-M device. By default, this feature is disabled. In either case, the pre-configured value for maximum number of password attempts {MaxNoA} is 10.)
This feature allows you to change your current DT4000-M password. You MUST know the existing password to utilize this function, as it will lock the device and prompt you for the existing DT4000-M password prior to invoking the ‘Change Password’ routine.
This feature resets the DT4000-M back to its original “out-of-box” state. Resetting the device will erase all of the data stored in the protected area and require users to generate a new password.
(Note: The DT4000-M must register with SafeConsole each time the device is reset. Do NOT use this function if you are on a stand-alone workstation or in a remote location that does not have access to the SafeConsole server. Consult your administrator before resetting DT4000-M.
This option provides basic information regarding the DT4000-M, including copyright, build number and serial number of the device. The ‘About’ section is also customizable (by your Administrator) in SafeConsole under the ‘Device User Information’ tab of Administrator Tools (up to 127 characters.)
| | | |
Figure 1.10 – About DT4000-M (Default) | Figure 1.11 – About DT4000-M (Custom) |
| | |
Document No. 48000141-001.A01 | DataTraveler® 4000 – Managed | Page 5 of 6 |
