Planning the Installation
Electrical Specifications
important
•Preheat times and cavity temperature recovery times will be increased slightly if operating on less than a 240 Vac circuit.
•This appliance is provided with electrical connec- tion leads in a flexible metal conduit. These leads may be a smaller gage than the standard household wiring of the dedicated supply circuit, but they are suitable for connection to these circuits under the jurisdiction of the National Electric Code, and/or the local inspection authority.
•Locate the junction box so that the wiring may be disconnected without removing the oven from the wall.
It is the owner’s responsibility to ensure that a qualified electrician performs the electrical connection of this appli- ance. The electrical installation, including minimum supply wire size, must comply with the National Electric Code ANSI/NFPA 70 (latest revision) and local codes and ordi- nances.
*A copy of this standard may be obtained from:
National Fire Protection Association 1 Batterymarch Park
Quincy, Massachusetts
The correct voltage, frequency and amperage must be sup- plied to the appliance from a dedicated, grounded, single phase circuit that is protected by a properly sized circuit breaker or
Model Type | Dedicated Circuit | Total | |
Required | Connected Load | ||
| |||
Single 27” | 240 Vac, 60 Hz |
| |
Single 30” | 4 wire 30 Amp | 4.6 kW (19.5 Amp) | |
Dedicated |
| ||
|
| ||
Double 27” | 240 Vac, 60 Hz |
| |
Double 30” | 4 wire 50 Amp | 9.25 kW (38.9 Amp) | |
Dedicated |
| ||
|
|
The above electrical ratings are for reference only. For the exact ratings see the appliance data plate. See page 3 for location.
Installation Instructions
Parts List
•Exhaust deflector with three (3) screws
•Mounting screws, four (4) for single ovens, six (6) for double ovens, two (2) different sizes may be included.
•Standard oven racks two (2) for a single oven, five (5) for a double oven
•GlideRack™ oven rack, one (1)
•Broiler grill and pan
•Meat probe, one (1)
•Ceran cleaning kit
•Stainless steel cleaner (stainless steel models only)
•Light lens pry stick
•Ease form
•Quick start guide
•Installation instructions
•Use and care manual
Verify that all the parts are included. If any item is missing or damaged, please contact your dealer immediately.
Make certain that you have all tools and parts necessary to ensure a proper installation before proceeding. If replace- ments parts are required, contact your Dacor dealer.
9