KiSS Networked Entertainment manual DVD Player KiSS DP-508

Accessing your files on the DP-508

Installing the software

Help and Info

Listening WebRadio

Accessing WebRadio

DVD Player KiSS DP-508

english français

Congratulations on your new KiSS DP-508

The many different functions provided by your new DVD Player will be a source of pleasure to you for many years to come. Naturally, you can play and watch DVD films with superb audio and visual quality. You can watch films in many other formats than DVD, such as MPEG-4, XviD, DivX. The audio features also give you the option of playing music CDs, MP3 or Ogg Vorbis files. The DP-508 automatically recognises each format and can read CD-RW and DVD-RW alike. Your new DP-508 also supports Picture CDs (jpg), which means that you can display your photos directly on the TV screen. This includes the pictures developed at the photo shop and any photos you have scanned and saved on a CD yourself.

Note: Do not use the DVD Player until you have studied the quick setup menu. To do so, the DVD Player must be connected to a TV set.

overview

Discover the player in all its angles

Front panel

The front panel has the standard buttons listed below. When the disk tray is open, push the end of the tray to close it.

										7		9
						2		3	5	13		15
	1
								4		6	8	10
								11		12	14	16
1.	On/Off				9. Fast Forward		Option on the Setup Menu
2.	CD Tray				10. Menu		11. Enter
3.	Open/Close						12.	Navigate Left
4.	Play/Pause						13.	Navigate Right
5.	Stop						14.	Navigate Up
6.	Previous Chapter						15.	Navigate Down
7.	Next Chapter						16.	Close
8.	Rewind
Back panel
Detailed overview of the back panel
													7
	8	1	2	3	4	5	6
					2

1

2 3 4 5

connecting

Refer to the illustration below to connect your Player to any video or audio system. The PC to DVD illustration will also show you how to adapt your player to your current network settings.

Video Connection

Connecting your KiSS DP-508 DVD player to your TV can be done with any of the cables below. (Only one cable can be connected at a time)

1RGB via SCART

2S-Video(the cable is an extra accessory)

3 Composite via SCART

4	Composite Video				TV
5	KiSS DP-508
	Component SCART (the cable is an extra accessory)
	1	3	5	4	2

Audio Connection

Connecting your KiSS DP-508 DVD player to your amplifier can be done with any of the cables below. (Only one cable can be connected at a time)

1. Connection to Router with Built-in Switch Connection with a Router Based Internet	Connection without a Router
Connection (illustration: 1 and 2)
3(Illustration: 3 and 4)

6	Optical output (the cable is an extra accessory)
7	Coaxial output (the cable is an extra accessory)
8	Analogue Stereo	KiSS DP-508		Amplifier
		8	7	6

PC to DVD Connection

Below are four examples of connection for your DP-508 to a PC enabling use of all its features and programmes.

quick setup

If your DVD Player is correctly connected (see the chapter on cable connections), a menu will appear when you turn on the DVD Player. The menu installs the most important settings for your TV set and language.

Note: If this menu does not appear when you start the DVD Player, recheck the cable connections.

Note: Try connecting your TV set using the Composite Video cables. Composite Video always produces a picture.

1 Language

2

Video

3

TV

4

Audio

5

IP Address

Select the language that will

Select the video connection

This

screen presents

two

If your TV set is connected

In order to use the KiSS PC-

be used whenever you open

your DVD Player is plugged

different types of

TV

via SCART, your TV is

Link software, you need to

the DP-508’s built-in menus.

with. Your options are SCART,

formats: 4:3 (normal) or 16:

automatically

provided

provide your DVD player with

Use the arrow buttons on

S-Video or Component

9 (wide screen).

with sound. If you would

your computer IP address. To

the remote control to move

video.

Composite

video

is

rather use an amplifier to

easily find this number, first

the rectangular frame to the

always available,

but

the

Note: Some 4:3 TV screens

reproduce

the

sound, you

install the KiSS PC-Link

language you wish to select

quality level is not as good

can display 16:9 format.

have two options to choose

software on your computer.

and press ENTER.

as the other connections.

from: the phono jack or one

Once this step is completed,

of the two digital outputs.

you will find the number

Note:

The

default Audio

under the Info Panel. Type

it on the provided screen.

You can always go back and start again if you happen to do something wrong,

choice should be stereo unless

Leave

it blank if you do

your player is connected to a

not want to set up your PC

Just press on the setup button of your remote, go to miscellaneous settings and

digital amplifier

connection for the moment.

select Quick Setup.

You

can always go back

to the quick setup menu if

Note: Your KiSS PC-Link software will ONLY work if the KiSS DP-508 is provided

you want to provide the IP

with a valid IP address.

4 address at a later stage.

accessories

Make sure the following accessories are included with your DVD Player.

KiSS PC-Link Software CD

1

1.	Ordinary Stereo Output
2.	Composite Video Output for TV
3.	S-Video Output for TV
4.	Coaxial Output for Amplifier
5.	Optical Output for Amplifier
6.	SCART for TV
7.	AC Input
8.	Ethernet
Display
The DVD Player is equipped with a VFD display which indicates the current ongoing activities.
	1	2
		3	4

6

7 8 9

10

11 13

12

14 15 16

18 17 19 20

21 22 23 24

25 26 27 28

		Needed Equipment		Needed Equipment
KiSS DP-508	Router	1. A router, with a build-in switch or a separate		1.	Switch/hub and 2 straight cables or a cross
		PC	switch/hub.		cable.
		2.	2 or 3 straight Ethernet cables.	2.	A windows PC with an Ethernet connection.
		3.	A Windows PC with an Ethernet connection.	3.	DHCP program (ex: Magic DHCP) or a player
		4.	The KiSS PC-link program.		with firmware 2.7.1 or later.
2. Connection to Router and Switch		Step by Step Guide		4.	The PC-link program.
		1.	Connect both the PC and the player to the	Step by Step Guide.
	Switch		router or switch/hub with straight cables	1.	Connect the player either straight to the PC
KiSS DP-508		2. Connect the router to the switch/hub via the			with the cross cable or through the switch
		PC	uplink connection.		with the straight cables.
	Router	3. Install the PC-link program on the PC		2.	Install the DHCP program, configure the
		4.	Check which IP address is given to the PC in		program to have and IP range and reboot the
			the PC-link program under info		computer.
3. Connection to Switch.		5. Insert this IP in the DP-508 and try to connect		3.	Install the PC-link program and make sure that
(The DHCP Server needs to be installed on the PC)			to the PC–link program		the computer’s IP are in the IP-range

advanced setup

Language Settings		Video Settings
The first menu is the Language settings menu. Here you select the language		You can select the TV type (16:9 or 4:3 aspect ratio), video system (Pal or
you wish to use for the menus, that will appear on the screen, and your		NTSC) and video output (Scart, S-Video, Component Video or Component
	5

You can always access the Setup menu and adjust the DP-508 to your specific requirements and hardware. Select “Setup” from the main screen or press the SETUP button on your remote control, and a menu will appear with the available options. The orange frame shows your position on the menu. Use the arrow buttons to move the frame and select by pressing the ENTER button. The settings on some of the menus have already been determined under Quick setup, but there are several settings available under Advanced setup as well.

Remote Control	Batteries for the Remote Control
	[size “AAA” (R6P)]

Power Cable	Audio Cable	SCART	S-Video
		(Provided in Europe only)	(Not Provided in Europe)

KiSS DVD Player DP-508

Composite Video

1.Indicates the selection of the disk being played

2.Indicates the track, chapter or program being played

3.Indicates the status on the source or the media playing

4.Indicates the type of media being played

Remote

The Player is delivered with a standard remote control. All the player’s functions can be performed from it.

1.	Standby	9.	Right Arrow	17.	Select lang/Audio	25	Delete
2.	Open Close	10.	Down Arrow	18.	Next Picture	26	Search
3.	Title/Menu	11.	Rewind	19.	Select Subtitle	27.	Volume +
4.	Menu	12.	Play/Pause	20.	Select Angle	28.	Volume -
5.	Return	13.	Fast Forward	21	Zoom
6.	Up Arrow	14.	Previous Chapter	22	Repeat	Note:
7.	Left Arrow	15.	Stop	23	Unused	Certain functions will only work if
8.	Enter	16.	Next Chapter	24	Setup	supported by the media.

		Now the DP-508 should be connected		configured in the DHCP program.
KiSS DP-508			4.	Turn on the DP-508 and check in the DHCP
				program under leases that the player
Switch	PC	Possible errors.		receives an IP
		• Cable problem, check that there is light in all	5.	Try to connect the player to the PC-link
		the ports in the switch/hub		program and stream audio, video or pictures
		• There is installed a firewall on the PC, that
4. Straight Connection with Cross-Over Cable.		blocks the ports that the PC-link program uses		If you have configured the DHCP program
		(port 8000 must be open)		correctly then the player should be able to
(The DHCP Server needs to be installed on the PC)		• The player and the PC are not on the same		connect to the PC.
		subnet (problem with playing video)
KiSS DP-508		• Your PC has been assigned a new IP address	Possible errors.
		from the DHCP server, which differs form the	•	Cable problem, check that there is light in all
	PC
		one enter in the player. (Solution use a static IP		the ports in the switch/hub
		on the PC)	•	There is installed a firewall on the PC, that
Cross-Over Cable				blocks the ports that the PC-link program uses
				(port 8000 must be open)

preferred language when playing a DVD film – for subtitles, speech and	Progressive (Progressive Scan)). Composite video is available in all modes
menus (they will only be used if the film supports the language).	except in progressive scan mode. Component Progressive delivers the best
	video quality, but be aware that if your TV does not support Progressive
	Scan the picture (and menu) will disappear. You can reset this to the factory
	settings by pressing: LOAD, INFO, 1, 2, 3 on the remote control.
Audio Settings	Miscellaneous Settings
KiSS has tuned the product to give you the best possible sound experience	This display lets you set your preferred level of protection on the films. Some
(Loudness). Under acoustic setup, you can neutralize these settings or	films are divided into levels, so that parents can prevent their children from
enhance them further by selecting dynamic sound. Speaker size is used	seeing a specific type of film. In the next menu item, you create a password
to make the right bass management. When using small front speakers, try	that is required for editing this setup*. The light in the DVD Player’s display
to place the subwoofer between the front speakers. Speakers level let you	can be modified from max to normal to min or off. All settings can be reset
change the level on the speakers individually. Select the channel you want	in the “Restore settings” menu, and the Quick setup can be re-initiated from
to change and use the volume buttons to adjust up and down.	the last menu.
	*If you wish to modify this setup later on, you must re-enter the password.

Note: Progressive scan only works on Component video output. This connection gives the best video quality. Only select Component Progressive if your TV supports it. To leave a menu, press the left arrow on the remote control.

playing medias

The DVD Player supports the following 6media: DVD Video, DivX, XviD, ISO MPEG-4, Audio CD, MP3, Ogg Vorbis and JPG.

DVD Menu

If you have adjusted your DVD Player according to the instructions above, you can now insert a DVD into your DVD Player. A moment later, the DVD menu will appear. Use the arrow buttons to navigate in the menu and start the film.

Note: As this menu is part of the DVD itself, it will vary from one DVD to another.

CD, MP3 and Ogg Vorbis

When you insert an audio CD or a disc with MP3 or Ogg Vorbis files, the player will automatically recognise the format and start playing it. You can use next/previous track or you can use the menu to navigate through the file structure, and select the song you want to hear by pressing enter.

DivX, XviD and MPEG-4

The DP-508 recognises the format and automatically starts playing the CD when you insert it into the drive. Use the counter in the display to help you to see where you are in the film. You have access to the usual playback options, such as stop, pause, go to next, time search, etc.

Photo CD and Jpeg

The DP-508 can show photos on your TV. The photos must be stored in JPEG format on a Disc. The player will automatically recognise the files, and start showing them as a slide show. In the menu you can navigate to find a specific photo, and start the slide show from here by pressing enter.

advanced functions

A number of advanced functions are located on the lower section of the remote control. These functions are described below. Some functions may not work with all media formats.

7

STEP	the players' hard disk. To do so, just view the	side of the screen will show information about
This function is not used	list of items already saved, and select the one	the film’s length, the number of chapters, the
AUDIO	to remove.	language options and the number of subtitles.
	SRCH	If the DVD player is turned on, but not playing
Press the (AUDIO) button to change the sound
format. The audio format options, such as two-	Use (SRCH) to find a specific spot on the disk.	films or other media, pressing this button will
channel stereo and six-channel surround, are	Time: Specify time, minutes and seconds	take you to a menu, where you can configure
determined by the film producer.	Title/Chapter: Find the title or the chapter	your DVD player. Here you can select the default
ZOOM	ANGLE	settings for language, sound, video, parental
		level, etc.
When watching the film, you can zoom in on	If the film supports more than one camera angle,
specific areas. You can zoom in either as the film	you can switch from one angle to another by
is playing or after you have paused it. Activate	pressing the (ANGLE) button.	These	buttons are used for increasing and
the function by pressing the (ZOOM) button,	SUBPIC	decreasing the sound volume.
and return to the normal picture by pressing the		MARK
button again.	Use this button to change the film’s subtitles.
TIP: Use the arrow buttons to move around the	If you press the (SUBPIC) button, a message	This button is used to select
enlarged screen display.	will appear in the top left corner of the screen	files for copy or deletion
REPEAT	indicating the number of available languages and
	the language that is currently active. If you press
As the film is playing, press the (REPEAT) button	the (SUBPIC) button again, you go to the next
and three options will appear on the screen.	language option. The number of languages is also
MODE: Shuffle (random chapter playing) or Off	determined by the film’s producer.
(deactivated)	SETUP
Repeat: Lets you decide whether to repeat the
section or the entire film.	If the DVD Player is in the process of showing a
DELETE	film or playing music, press the (SETUP) button to
	see the available options on the disk. For instance,

Use this function to delete any files stored on if you are watching a DVD film, the left-hand

webradio

WebRadio enables you to listen to a great8number of radio stations via the internet. Remember that all the functions discussed below are only available if your player is properly connected (see connecting section).

WebRadio, comes as a user friendly way of listening to internet radio on your DP- 508 DVD Player. Just select the WebRadio function on the player’s main screen.

The WebRadio interface is relatively simple to use. It enables you to browse and select any Internet radio station available. The browsing is done by genre (Pop/Rock, Classical, Jazz...) or by country. Once selected, just press “enter”.

Favorites

The radio stations can also be saved in the “favorites” menu, enabling you to reach them quickly.

More info, news about updates and full help will be available from: webradio2.kiss- technology.com

KiSS PC-Link

KiSS PC-Link enables you to connect your computer to your DVD player through the KiSS PC-Link software. You can therefore play, watch or listen to your PC files on your TV via the KiSS DP-508.

Note: Clicking the search function will help your computer to find your multimedia files

The KiSS PC-Link software must be installed on your computer, it is PC compatible and requires a machine running minimum Microsoft Windows 98, Internet Explorer 4. After inserting the disk, the installation program will start automatically, if not double click the "Setup" icon on your CD. Select your preferred language and click "Next". Once the installation is completed, the KiSS PC-Link programme will open. The main window is divided into four folders, Audio, Video, Pictures and Info.

After connecting your PC to your DP-508 (see Connection Chapter) and entering your computer IP address on your DVD player (see Quick Setup Chapter), press the “Menu” button on your remote control and choose PC-Link. Then from the submenu you can access, Audio, Video or Pictures. If there are more than one computer running KiSS PC-Link, a menu in the player allows you to browse the network for other connected PCs. You can also press the "browse network" icon on the main screen.

KiSS PC-Link Audio Panel		KiSS PC-Link Pictures Panel
Drag and drop the audio files you would like to access from your DP-508.		Direct access to the picture files located on your PC. These can be selected
You can create folders with your favourite music or specific types of music.		or dragged and dropped. You can also tidy them into a folder from the KISS
You can easily add, remove or move the files either by using the window		PC-link window.
buttons or right clicking on the mouse and select an action.		KiSS PC-Link Info Panel
KiSS PC-Link Video Panel
		You will find your computer IP address located in this panel. This has to be
Drag and drop or select a movie file through the search window. As for
		entered in the last menu of the Quick Setup (see Quick Setup Chapter). This
the Audio Panel you can define actions by selecting, pressing the window		menu also enables you to “Check for Updates” and access the KiSS web
buttons or right-click a file.	9site.

hard disk functions

KiSS DP10-508 holds an 80GB Hard Disk enabling you to store Audio/Video/Picture content on it. Only computer generated files can be stored on the Hard Disk. DVDs, Audio CDs, SVCDs (all type of SVCDs), VCDs can not be copied.

Access the Hard Disk

The DP-508 is equipped with a built-in 80GB Hard Disk. To access it, select the Hard Disk icon on the main screen. You can now make you selection between playing video, listening to audio, view pictures or view hard Disk’s infos.

Copying files on the Hard Disk

There are two ways of copying files on the DP-508’s Hard Disk.

1. From a CD. Insert a CD in the Player’s drive. The DP-508 will automatically recognise the format

and start to play the disc’s content. Press the “Menu” button on the remote to access the list of files storted on the CD, select the file(s) to copy using the “Mark” button, and press the “Enter” button on the remote. This will instantly copy the file from the CD to the Hard Disk. If the CD contains MP3 files, there is no need to press the “Menu” button on the remote, as the list of files will appear automatically.

2. From PC-Link Software. Once PC-Link is correctly running (see the connection and PC-Link sections for details). Press the “Menu” button on the remote, choose KiSS PC-Link from the left list of icons. Make your selection between audio/video/picture files, and choose the file to be copied using the “Mark” button. Once selected, hit the “Enter” button from the remote. The file is being copied from the PC to the Player over the network.

In these two cases, both files or folders can be copied.

Deleting files on the Hard Disk

To delete files on the hard Disk, press “Menu” on the remote to access the hard Disk functions. Choose within Audio/Video/Picture the file to delete. Once selected, press the “Delete” button of the remote. The file will instantly be removed.

Getting infos and Formatting the Hard Disk

To format the Hard Disk (Erasing all its content). Press “Menu” on the remote control, and, choose Hard Disk from the left list of icons. The Player will ask you to choose between Audio/Video/Picture or Info. Select info. This menu shows you how much space available the hard Disk holds. An option, at the bottom also enables you to “Clean the Hard Disk” (Format). Selecting this function will erase all content stored on the Players Hard Disk.

software update

KiSS players11get regularly updated enabling new functions or improvements. An internet connection and a CD Burner are required for this operation

Getting the Firmware

KiSS Players firmware updates can be found on KiSS Technology’s home page. Under www.kiss-technology.com, “end user” section, then “support”. Once on the support page, choose “upgrade”. Select the player to upgrade from the list, and choose between PAL (Europe and Asia) or NTSC (US and Japan). The file should download on the PC’s Hard Disk. KiSS recommends Nero if burning the CD on a PC and Toast if burning on a Mac. The file is a Disc Image and has to be burnt as such. Make sure that “Disc at Once” and “Finalize CD” in Nero are selected or “Write Disc” and “Verify CD” in Toast are enabled. If not, an error could occur while updating the player. More info are available in the “How to Burn” Section of the Support Page.

Updating the Player

Once the CD is burnt with the firmware update, it needs to be loaded in the player which will read it. A message will come up on the screen asking to restart the DVD Player. This should be done from the on/off button on the front panel. The CD is being loaded, this action might take a little time. The Firmware Update Screen comes up on the TV, and two options can be selected, Full Update or Partial Update. Full update, updates the firmware and resets the player to its factory settings. Partial Update, only updates the firmware. KiSS recommends users to use Full Update. The player is being updated, which might take up to a minute. Restart is needed. To verify if the player has been well updated, once it’s back up, press “Setup”, the number of the current firmware is written on the top left corner of the screen.

support

More information or assistance is available at KiSS Technology’s website under End User/Support/After sales for DVD Player.

Address: www.kiss-technology.com

Resetting

To reset the settings of the DP-508, press the following buttons on the remote control: “Open”, “Clear”, “1”, “2”, “3”. KiSS Technology A/S reserves the right to change all settings and specifications without notice.

Important safety information

•Read these instructions carefully and pay attention to all warnings and guidelines.

•Do not overload electrical sockets or extension cables. Overloading can result in fire or electric shock.

•Never insert objects into the DVD player’s cabinet door. They might come into contact with dangerous voltage points or short-circuit components, which can cause fire or electric shock.

•Do not spill liquids on the DVD player.

•If the DVD Player does not function normally, or if it emits unusual sounds or odours, pull out the plug immediately and contact an authorised technician.

•Do not attempt to service the DVD player yourself. If you open or dismantle the shielding, you expose yourself to dangerous voltage and other hazards. All maintenance must be carried out by qualified service technicians.

Environmental information

•The system is made of recyclable materials which can be reused if disassembled by authorised personnel.

•Please follow local regulations for the disposal of packaging materials, used batteries and discarded units.

Copyright

This product contains copyright technology which is protected pursuant to the patents that are the property of Macrovision Corporation and other copyright holders. Any use of this copyright technology must be approved by Macrovision Corporation. The technology is intended for use in the home unless otherwise approved by Macrovision Corporation. Breakdown and disassembly are prohibited.

Made under license from Dolby Laboratories. “Dolby” and the double “D” symbol are trademarks of Dolby Laboratories. “DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.

Warranty certificate

KiSS provides a twenty-four (24) month warranty from the date of purchase against material and manufacturing defects. For defects covered by the warranty, the product must be returned to the dealer that sold the product.

Terms of Warranty

1.The warranty is only valid on presentation of the original sales receipt, and if the serial number on the product is fully legible.

2.The obligations of KiSS are limited either to repair or replacement of defective components. The repair or replacement of defective components is based on an assessment by KiSS. Exchange is only possible if the repair cannot be performed.

3.Warranty repairs must be carried out by an authorised KiSS dealer, or an authorised service centre. No remuneration is provided for repairs performed by unauthorised workshops. Any repairs or damage to the product caused by unauthorised intervention are not covered by this warranty.

DVD films are normally supplied with a regional code (1), (2), etc., and can only be played on DVD players/Players with the same regional code. You can see the region on the back of the player. Region tags appear as follows:

4.This product will not be considered as being defective, either in materials or in manufacture, if adaptation to national, local, technical or safety- related requirements is required in countries other than the specific country for which the product was originally designed and manufactured.

5.This warranty does not cover these types of adaptations, and no remuneration will be offered for these types of adaptations or for any consequential damages. The warranty does not cover the following:

a)Periodic inspection, maintenance and repair or replacement of parts resulting from normal wear.

b)Costs connected to transport, disassembly or installation of the product.

c)Misuse, including use for purposes other than was intended, or faulty installation.

d)Damage caused by lightning, water, fire, natural catastrophes, war, insurrection, incorrect line voltage, insufficient ventilation or other causes outside of the control of KiSS.

6.This warranty applies to every legal owner of the product during the warranty period.

Packaging

If possible, use the original packing material for any shipping. Otherwise, repack the DP-508 using:

•A reinforced cardboard box, strong enough to carry the weight of the product.

•At least 6 cm / 2.36 inches of shock-absorbing material around the product.

•Nonabrasive dust-free material for the other parts.

•Nonabrasive wrapping for the product. (Dust and dirt cover)

•Repack the product in such a way as to ensure that it cannot shift in the box during transport.

•No other alternative will be accepted

Information we must receive before repairing the product: Model name: KiSS DVD Player DP-508

Serial no.:

Fault description (if possible): Copy of the invoice or sales receipt

The dealer’s name, address and phone no.

Personal information: Name, address, post code/city, phone no. and e-mail address (optional).

Your signature

Dealer’s stamp and signature Date

KiSS Technology A/S, Slotsmarken 10, DK 2970 Hørsholm, Denmark

Hotline (user support) +45 45 17 00 07

hotline@kiss-technology.com

All contacts with KiSS Support should be addressed in English