VENTILATION SYSTEM
THIS MICROWAVE OVEN/HOOD SYSTEM IS DESIGNED FOR ADAPTATION TO THREE TYPES OF HOOD
VENTILATION SYSTEMS:
A. Vertical Exhaust
-- outside ventilation
B. Horizontal Exhaust
-- outside ventilation
C. Recirculating
-- non-vented, ductless
Select the type required for your installation.
Recirculating (ductless) installation requires
CHARCOAL FILTER.
Your Microwave Oven/Hood System is preset for VERTICAL Exhaust; follow the procedure below (A) to attach the
Exhaust Adaptor Assembly if your installation will use a vertical exhaust system. If you will need to use a
HORIZONTAL exhaust system, proceed to step
B;
or for a RECIRCULATING system, proceed to page 9 (step C).
VERTICAL EXHAUST: Outside Ventilation
A.
The unit is shipped assembled for vertical exhaust. Remove the 2 tapping screws
the Exhaust Adaptor to the fan cover on the top of the outercase cabinet with the 2
shown in
Figure 2.
Proceed to
Preparation of Wall and Top Cabinet
on page 10.
from the fan cover. Attach
tapping screws provided as
P Exhaust Adaptor Assembly - - -
Figure 2
B. HORIZONTAL EXHAUST: Outside Ventilation
1. Remove and save 3 screws.
Remove fan cover bracket shown in
Figure 3.
Fan Cover Bracket - - - /
Figure
3
7