Adjustthe Door

Depending on your model, your refrigerator may have two

(Style 1) or four (Style 2) adjustable rollers located at the base of the refrigerator. If your refrigerator seems unsteady or you want the door to close easier, adjust the refrigerator's tilt using the instructions below.

WARNING

Excessive Weight Hazard

Use two or more people to move and install refrigerator.

Failure to do so can result in back or other injury.

1.Move the refrigerator into its final location.

2.Remove the base grille. Grasp the grille firmly and pull it toward you.

3.Remove the bracket covers. Insert the eraser end of a pencil in the cover notch. Apply slight downward pressure to the notched side of the cover while swinging it off.

4.Using a screwdriver or ³⁄₈" hex driver, turn the roller adjustment screw(s) on each side to raise or lower that side of the refrigerator.

NOTE: Having someone push against the top of the refrigerator takes some weight off the adjustment screws and rollers. This makes it easier to turn the screws.

To raise, turn the roller adjustment screw to the right.

To lower, turn the roller adjustment screw to the left.

NOTE: It may take several turns of the roller adjustment screw to adjust the tilt of the refrigerator.

Style 1 - Front leveling

A

B

A. Roller adjustment screw

B. Stabilizing foot

Style 2 - Front and rear leveling

A BB A

CC

A. Front adjustment screw

B. Rear adjustment screw

C. Stabilizing foot

5.Open the door again to make sure that it closes as easily as you like. If not, tilt the refrigerator slightly more to the rear by turning both front adjustment screws to the right. It may take several more turns, and you should turn both adjustment screws the same amount.

6.Lower the stabilizing foot by turning it clockwise until it is firmly against floor.

7.Turn the front adjustment screws counterclockwise to allow the full weight of the refrigerator to rest on the stabilizing feet.

8.Replace the bracket covers. Place each bracket cover into the outer edge, swing the cover toward the cabinet and snap it into place.

9.Replace the base grille.

Water System Preparation

Please read before using the water system.

Immediately after installation, follow the steps below to make sure that the water system is properly flushed.

1.Turn off the ice maker by opening the freezer door and lifting up the wire shutoff arm as shown.

2.Install the interior water filter. The interior water filter mounting bracket is located on the left side wall of the refrigerator compartment.

NOTE: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. Systems certified for cyst reduction may be used on disinfected waters that may contain filterable cysts.

Remove blue bypass cap and retain for later use.

Carefully remove the interior water filter from its packaging. Remove the sealing label from the end of the filter and insert it into the filter head.

Gently rotate the filter clockwise until it stops. Then snap the filter cover closed.

12

Page 12
Image 12
KitchenAid 2300262 manual Adjustthe Door, Water System Preparation, Style 1 Front leveling, Style 2 Front and rear leveling

12828134, 2300262 specifications

The KitchenAid 2300262,12828134 stands out as an essential tool for both amateur chefs and seasoned culinary enthusiasts. This versatile appliance combines innovative features with robust design, catering to a wide range of cooking needs.

One of the main features of this model is its powerful motor, which provides consistent and reliable performance. With multiple speed settings, it allows for precise control, whether you’re mixing, kneading, or whipping. This flexibility is perfect for various recipes, from delicate meringues to dense bread doughs.

The 2300262,12828134 incorporates KitchenAid's renowned planetary mixing action, which ensures that all ingredients are thoroughly combined. This technology allows the mixing head to rotate in one direction while the beater rotates in the opposite direction, resulting in efficient and even mixing. This feature saves time and guarantees consistent results in every batch.

Another defining characteristic of this kitchen appliance is its durability. The construction is made from high-quality materials, ensuring longevity and reliability. The robust design withstands the rigors of frequent use, making it a worth investment for any kitchen.

For added convenience, this model features a tilt-head design, which simplifies the process of adding ingredients and cleaning the bowl. The easy-access design means you don’t have to fuss with complicated mechanisms, allowing you to focus on your cooking.

The KitchenAid 2300262,12828134 also comes with a variety of attachments, such as dough hooks and whisks. These attachments enhance the appliance's versatility, enabling it to perform a multitude of tasks. Whether you need to whip cream, mix batter, or knead dough, this model has you covered.

Additionally, compatibility with a range of optional accessories expands its functionality even further. From pasta makers to food grinders, the possibilities are virtually endless, allowing you to experiment with various cooking techniques and recipes.

In summary, the KitchenAid 2300262,12828134 is more than just a mixer; it is a multifunctional appliance designed to elevate your cooking experience. With its powerful performance, innovative technologies, and robust construction, it is a vital addition to any kitchen that values quality and efficiency. Whether you’re preparing everyday meals or gourmet dishes, this KitchenAid model empowers you to achieve your culinary goals with ease.