Sealed Gas Cooktop

Gas supply requirements

JBIInput ratings shown on the model/serial

. rating plate are for elevations up to 2,000 feet. For elevations above 2,000

feet ratings should be reduced at a rate of 4% for each 1,000 feet above sea level.

Copies of the standards listed above may be obtained from: l American Gas Association

1515 Wilson Boulevard Arlington, Virginia 22209

shutoff

valve

A

“open”

position

 

The supply line shall be equipped with an approved shutoff valve. This valve should be located in the same room as

Explosion Hazard

Use a new AGA approved gas supply line. Install a shut-off valve.

Securely tighten all gas connections.

If connected to LP, have a qualified person make sure gas pressure does not exceed water column rating specified in LP conversion kit. Examples of a qualified person include licensed heating personnel, authorized gas company personnel, and authorized service personnel.

Failure to do so can result in death, explosion, or fire.

Observe all governing codes and ordinances.

Important: Cooktop must be connected to a regulated gas supply.

This installation must conform with local codes and ordinances. In the absence of local codes, installation

must conform with American National Standard, National Fuel Gas Code ANSI 2223.1 - latest edition.*

Ic.IThis cook-top is manufactured for use with NATURAL gas and it is design- certified by A.G.A.

L.P. gas conversion

This cooktop can be converted for use with L.P. gas. However, no attempt shall be made to convert the appliance from the gas specified on the rating plate for use with a different gas without consulting the serving gas supplier. Conversion must be done by a qualified service technician. Conversion Kit No. 4173627 is available from your KitchenAid dealer or authorized parts distributor.

 

Provide a gas supply line of 3/4” rigid

.

pipe to the cooktop

location. A

IDI

smaller size pipe on

long runs may

result in insufficient gas supply. Pipe-joint compounds made for use with NATURAL and L.P. gas must be used.

--

El If local codes and ordinances permit,

. A.G.A.-design-certified, new flexible metal tubing is recommended for

connecting cook-top to the gas supply line. Do Not kink or damage the flexible tubing when moving the cooktop. A l/2” male pipe thread is needed for connection to pressure regulator female pipe threads.

the cooktop and should be in a location that allows ease of opening and closing. Do Not block access to shutoff valve. The valve is for turning on or shutting off gas to the appliance.

El If rigid pipe is

. used as a gas supply line, a co

pipe fittings must be used

connection to the cooktop. All strains

must be removed from the supply and fuel lines so cooktop will be level and in line.

[H The regulator must be checked at a

. minimum 1” water column above the set pressure. The inlet pressure to the

regulator should be as follows for operation and checking the regulator setting:

NATURAL GAS:

Set pressure 4 inches Maximum pressure 14 inches

Line Pressure Testing:

Testing above l/2 psi (gauge)

The cooktop and its individual shutoff valve must be disconnected from the gas supply piping system during any pressure testing of that pressures greater than l/2 psig (3.5 kPa).

Testing at l/2 psi (gauge) or lower

The cooktop must be isolated from the gas supply piping system by closing its individual manual shutoff valve during any pressure testing of the gas supply piping system at test pressures equal to or less than l/2 psig (3.5 kPa).

19

Page 19
Image 19
KitchenAid 3186523 installation instructions Sealed Gas Cooktop, Gas conversion

3186523 specifications

The KitchenAid 3186523 is a versatile and highly functional kitchen accessory designed to elevate your culinary experience. This product is part of KitchenAid's esteemed lineup of kitchen tools, known for their reliability, innovative features, and timeless design. The 3186523 model showcases some of the best attributes that have made KitchenAid a household name.

One of the standout features of the KitchenAid 3186523 is its robust construction, which combines durability with aesthetic appeal. Made from high-quality materials, this kitchen accessory is designed to withstand the rigors of daily use while maintaining its sleek appearance. The heavyweight build provides stability, ensuring that it performs consistently regardless of the task at hand.

In terms of technology, the KitchenAid 3186523 employs innovative design principles that make food preparation easier and more efficient. This model typically includes features such as ergonomic handles, allowing for a comfortable grip during use. The thoughtfully designed shape of the accessory enhances maneuverability, making it suitable for various tasks, whether cutting, mixing, or serving.

The versatility of the KitchenAid 3186523 extends to its compatibility with a wide range of KitchenAid products. This accessory is designed to complement other appliances and tools in the KitchenAid line, such as stand mixers and food processors, enhancing their functionality and making it easier to create a variety of dishes.

Cleaning and maintenance are also made simple with this model. Most KitchenAid accessories, including the 3186523, are dishwasher safe, reducing the hassle of cleanup. Additionally, the materials used are often resistant to stains and odors, ensuring that your accessories will remain looking new even after extensive use.

One of the defining characteristics of KitchenAid products, including the 3186523, is their iconic style. Available in a variety of colors, this accessory can seamlessly blend with any kitchen décor, adding a touch of elegance to your culinary space.

In conclusion, the KitchenAid 3186523 delivers an impressive combination of durability, functionality, and style. Whether you're a seasoned chef or a casual cook, this kitchen accessory serves as an invaluable tool that caters to a wide array of cooking and baking needs, making it a worthy addition to any kitchen.