KitchenAid 3405634 warranty Selecting the right cycle and temperature setting, To stop your dryer

Starting your dryer	O p e r a t i n g Y o u r D r y e r
	(cont.)

6.Push the Start button.

NOTE: Your dryer stops automatically when a cycle ends.

Stopping and restarting your dryer

You can stop your dryer anytime during a cycle.

To stop your dryer:

Open the dryer door or turn the Cycle Control knob to Off.

NOTE: The Cycle Control knob should point to an Off area when the dryer is not in use.

To restart your dryer:

Close the door, select a new cycle and temperature (if desired), and push the Start button.

Selecting the right cycle and temperature setting

Cycle and temperature tips	Drying tips
• In the Automatic cycle (Sensor Dry), the FLO-	• Make sure you have selected the correct cycle
THRU™ Drying System automatically reduces	and temperature for your load. For example,
the heat near the end of the cycle to prevent	select a High temperature setting for best drying
overdrying.	results with extra heavy items.
• If your dryer has a special Ultra Low or Extra Low	• Always follow care label directions when they
temperature setting, this reduces drying tempera-	are available.
tures and provides enhanced fabric care for	• If you use fabric softener sheets, always use
delicates and other fine fabrics.
	fabric softener sheets labeled as dryer safe and
• If some types of loads in the cycle descriptions
	follow package instructions carefully.
have more than one suggested temperature	• Remove the load from the dryer as soon as tum-
setting, choose the lowest setting available on
	bling stops to reduce wrinkling. This is especially
your dryer.
	important for permanent press, knits, and syn-
• The last few minutes of all cycles are without heat
	thetic fabrics.
to make the load cooler to handle.

9