DISHWASHER CARE

Cleaning

Cleaning the exterior

In most cases, regular use of a soft, damp cloth or sponge and a mild detergent is all that is necessary to keep the outside of your dishwasher looking nice and clean. Dry with a clean, lint-free cloth.

Cleaning the interior

Hard water minerals can cause a white film to build up on the inside surfaces.

Do not clean the dishwasher interior until it has cooled. You may want to wear rubber gloves. Do not use any type of cleanser other than dishwasher detergent because it may cause foaming or sudsing.

To clean the Spray Arm

1.Gently remove the base rack. Lift from the back end first so that you do not bump the detergent and rinse aid dispenser.

2.Lift the spray arm and shake out any foreign material.

3.Rinse the spray arm under running water and wipe it with a damp cloth.

4.Place the spray arm back onto the impeller.

To clean the Drain Filter

1.If the base rack is in place, lift up the drain filter access panel located under the silverware basket.

2.Lift and remove the drain filter out of the drawer.

3.Empty the drain filter, rinse under clean running water, and place back into the drain space.

4.Make sure that the drain filter is flush with the filter plate.

To clean interior

Make a paste with powdered dishwasher detergent on a damp sponge and clean.

OR

See the vinegar rinse procedure in “Spotting and filming on dishes” in “Troubleshooting.”

NOTE: Run a Normal cycle with detergent after cleaning the interior.

To clean the Filter Plate

1.Make sure that the dishwasher is cool before you start cleaning the filter plate and follow the instructions for removing the spray arm and drain filter.

2.In the center of the filter plate, there are two rings — an outer ring and a center ring. Hold the center ring still and turn the outer ring counterclockwise, ¹⁄₈ turn, until the tabs and notches in both rings align. This will release the filter plate.

Cleaning the Spray Arm, Drain Filter and Filter Plate

A

B

C

D

E

F

A. Spray arm

B. Drain filter

C. Outer ring

D. Filter plate

E. Center ring

F. Impeller

A

B

C

A.Impeller

B.Center ring

C.Outer ring

Correct locking position of Filter Plate with motor assembly

3.Lift up the filter plate. Remove any soil, wash in hot soapy water, and rinse thoroughly in clean water. The bottom of the drawer can be wiped with a damp cloth.

4.Replace the filter plate so that it lies flat in the base of the drawer.

5.Align the outer ring making sure that the tabs align with the notches in the center ring.

6.To lock the filter plate into position, hold the center ring while you turn the outer ring clockwise until the lines on the two rings align. (See illustration above.)

7.When properly installed, you should not be able to move the filter plate.

IMPORTANT: For best performance, the drawer must be used with the filter plate, drain filter, and spray arm correctly in place.

15

Page 14 Page 16
Page 15
Image 15
KitchenAid 8573754A, 528824 manual Dishwasher Care, Cleaning
Page 14 Page 16

8573754A, 528824 specifications

The KitchenAid 528824 and 8573754A are standout models in the realm of kitchen appliances, primarily celebrated for their durability, versatility, and innovative features. Engineered to enhance culinary experiences, these stand mixers are essential tools for both professional chefs and home cooks alike.

One of the primary features of the KitchenAid 528824 is its robust motor, which provides exceptional power and efficiency. With a 5-quart stainless-steel bowl, it boasts ample capacity for mixing sizable batches of dough, batter, or any other concoction. The mixing bowl is also equipped with a comfortable handle for ease of use and is dishwasher-safe, making cleanup effortless.

The 8573754A model excels in convenience, featuring a planetarium mixing action that ensures thorough and consistent mixing of ingredients. This unique mixing action rotates the beater around the bowl while also spinning in place, ensuring that every bit of the mixture is perfectly blended. The power hub of both models is designed to accommodate over 12 optional attachments, allowing users to explore a variety of culinary techniques beyond mixing, including pasta making, chopping, and vegetable spiraling.

In terms of design, both models are aesthetically pleasing, available in a range of colors that allow them to seamlessly blend into any kitchen decor. The high-quality finish not only enhances their visual appeal but also provides durability against scratches and stains.

User-friendly controls are another hallmark of the KitchenAid 528824 and 8573754A models. Each mixer features multiple speed settings, allowing users to adjust the mixing speed according to their specific needs, whether it’s gently folding in ingredients or whipping cream at high speeds. The tilt-head design facilitates easy access to the bowl and attachments, making adding ingredients a breeze.

Safety is a priority, with features like a locking mechanism that keeps the head securely in place during operation. Additionally, the base of the mixers is weighted to prevent any movement while in use.

In conclusion, the KitchenAid 528824 and 8573754A combine power, versatility, and style, making them indispensable additions to any kitchen. Their robust design, innovative technology, and user-friendly features cater to cooks eager to elevate their culinary skills, ensuring delightful and expertly prepared dishes every time.
Top Page Image Contents