KitchenAid 5CO manual Attaching Your Can Opener, Using Your Can Opener, English, To Attach, A C B

Attaching Your Can Opener

English

To Attach:

Before attaching the Can Opener, turn off and unplug the stand mixer.

1.Depending on which type of hub you have, either flip-up the hinged cover or loosen the attachment knob (A) by turning it counterclockwise and remove attachment hub cover.

2.Insert the attachment shaft housing (B) into the attachment hub (C), making certain that the power shaft fits into the square hub socket. Rotate the attachment back and forth if necessary. When the attachment is in proper position, the pin on the attachment housing will fit into

the notch on the hub rim.

3.Tighten attachment knob until attachment is completely secured to mixer.

A

C

B

TUVRhe inland

gscepheerhpenultfte

Using Your Can Opener

To Use:
1.	Lift the handle (A) and rotate it to the	A
	right side.
2.	Hold the can in a vertical position with
	the lid edge underneath and in back of
	the round knife and then rotate handle
	to left.
3.	Turn to Speed 2. The top of the can
	will be cut and held from the contents
	of the can by the magnet.
4.	Turn Speed Control to “O” (OFF). Hold
	can and rotate handle to the right side
	to release the can.

2