![](/images/new-backgrounds/1060574/6057417x1.webp)
Preparing the Food Processor for Use
WARNING
Cut Hazard Handle blades carefully.
Failure to do so can result in cuts.
2.Fit the disc over the metal pin on the disc stem with the
Mini Bowl Assembly
1.Place the mini bowl inside the work bowl over the power shaft. Rotate the mini bowl until it falls into place. When properly seated in the work bowl, the mini bowl cannot be rotated.
2.Fit the mini blade on the power shaft. It may be necessary to rotate the blade until it falls into place.The mini bowl can also be placed in the chef’s bowl in a similar manner.
3.To remove the mini bowl after processing, lift the bowl using the two finger grips located along the top edge of the bowl.
Chef’s Bowl Assembly (5KFPM776)
Place the chef’s bowl inside the work bowl over the power shaft. Rotate the chef’s bowl until it falls into place. When properly seated in the work bowl, the chef’s bowl cannot be rotated.
The chef’s bowl can only be used with the slicing and shredding discs – the multipurpose blade cannot be used. To remove the chef’s bowl after processing, lift the bowl using the two finger grips located along the top edge of the bowl.
Continued on next page
English
9