Special Toasting Functions
Toasting Sandwiches
Your toaster features an accessory and a special setting to toast sandwiches made with thinly sliced meats and cheese.
The hinged design of the Sandwich Rack accessory opens flat to make inserting and removing sandwiches easy.
Preparing your sandwich:
1.Lightly butter the outside of the sandwich bread – do not butter the side that will face the filling. Buttering the outside of the bread will slow browning and help warm the filling.
2.Fill the sandwich with desired ingredients, but do not overfill it! Thinly sliced ingredients – like ham, turkey, and cheese – work best.
3.Open the rack by spreading the handles apart. Then, place an edge of your sandwich flush with the bottom channel of the rack, as shown.
4.Press the sandwich rack handles together to grip the sandwich. Close the clip to keep grids together.
NOTE: Do NOT toast sandwiches without the Sandwich Rack, because cheese or other food could melt and stick to the interior of the toaster.
Do NOT store your Sandwich Rack in the toaster, or place it back in the toaster once sandwich is toasted and unloaded. This would start a new toasting cycle and prevent toaster from working properly.
Toasting your sandwich:
1.Set the Shade Control
to the desired level of brownness, then press the SANDWICH button.
2.Insert the Sandwich Rack into the toaster slot, with your sandwich inside, as shown. The toaster will automatically lower the Sandwich Rack and start toasting.
3.When the sandwich is ready, a signal will beep 3 times, and the Sandwich button light will blink.
4.Remove Sandwich Rack and press either the SANDWICH button or the TOAST/ CANCEL button to return the carriage to its proper position.
If Sandwich Rack is not removed, a signal will beep every 30 seconds for 2 minutes and the Sandwich button light will blink to remind you to remove it. If Sandwich Rack is not removed within 2 minutes, the toaster will automatically turn off.
In any case, the Sandwich Rack must be removed to operate toaster again.
English
13
