3.Lay the tines down, toward the center of the rack.
SURE-HOLD TM light item clips
The light item clips hold lightweight plastic items like cups, lids, or bowls in place during washing.
To move a clip
1.Pull the clip up and off the tine.
2.Reposition the clip on another tine.
Adjustable 2-position top rack
You can raise or lower the top rack to fit tall items in either the top or bottom rack. Raise the top rack to accommodate items up to 9 in (23 cm) in the top rack and 13 in (33 cm) in the bottom rack, or lower the top rack to accommodate items up to 11 in (28 cm) in both the top and bottom racks. Adjusters are located on each side of the top rack.
To raise the top rack
Lift the rack on either, or both, sides until the rack is level.
NOTE= The top rack adjusters MUST be level.
To lower the top rack
Press both rack adjusters and slide the rack back to its original position.
Loading the Bottom Rack
The bottom rack is designed for plates, pans, casseroles, and utensils. Many items, up to 13 in (33 cm) tall, fit in the bottom rack. (See recommended loading patterns shown.)
NOTE: The features on your dishwasher rack may vary from the drawings shown.
10 place setting
12 place setting
Do not load glasses, cups, or plastic items in the bottom
rack. Load small items in the bottom rack only if they are secured in place.
Load plates, soup bowls, etc., between tines.
Ovedap the edges of plates for large loads.
Load soup, cereal, and serving bowls in the rack in a variety of ways depending upon their size and shape. Load bowls securely between the rows of tines. Do not nest bowls because the spray will not reach all surfaces.
Utensil load
