English
R-9
Planetary Mixing ActionMixer UseSpeed Control Guide
PERSONALINJURY HAZARD
To avoid personal injury and damage to
the beater, do not attempt to scrape
bowl while mixer is operating; turn
mixer off. Should scraper or other
object drop into bowl, turn motor OFF
before removing.
!WARNING
The bowl and beater are designed to provide
thorough mixing without frequent scraping.
Scraping the bowl once or twice during
mixing is usually sufficient.
The mixer may warm up during use. Under
heavy loads with extended mixing time, you
may not be able to comfortably touch the
top of the unit. This is normal.
Your KitchenAid®Mixer will mix faster and
more thoroughly than most other electric
mixers. Therefore, the mixing time in most
recipes must be adjusted to avoid
overbeating.
During operation, the flat
beater moves around the
stationary bowl, at the
same time turning in the
opposite direction on its
own axis. The diagram
shows the complete
coverage of the bowl made
by the path of the beater.
NUMBER OF SPEED
1 STIR For slow stirring, combining, mashing, starting all mixing
procedures. Use to add flour and dry ingredients to batter, add
liquids to dry ingredients, and combine heavy mixtures.
2 SLOW MIXING For slow beating, mashing, faster stirring. Use to beat heavy
batters and candies, start mashing potatoes or other vegetables, cut
shortening into flour, beat thin or splashy batters, and mix and
knead yeast dough. Use with Can Opener attachment.
4 MIXING, BEATING For mixing semi-heavy batters such as cookies. Use to cream
sugar and shortening and add sugar to egg whites for meringues.
Medium speed for cake mixes. Use with attachments: Food
Grinder, Rotor Slicer/Shredder and Fruit/Vegetable Strainer.
6 BEATING, For beating or creaming, medium fast whipping. Use to finish
CREAMING mixing cakes, doughnut and other batters. High speed for cake
mixes. Use with Citrus Juice attachment.
8 FAST BEATING, For whipping cream, egg whites, and boiled frostings.
WHIPPING
10 FAST For whipping small amounts of cream and egg whites. Use with
WHIPPING Pasta Maker and Grain Mill attachments.
NOTE:The Speed Control Lever can be set between the above speeds if a finer adjustment is required.