Level Dryer
Check the levelness of the dryer. Check levelness first side to side, then front to back.
If the dryer is not level, prop up the dryer using a wood block. Use a wrench to adjust the legs up or down and check again for levelness.
Reverse Door Swing
You can change your door swing from a
Remove the door
1.Open the dryer door. Remove the 4 screws that hold the door hinge on the front panel of the dryer. Loosen, but do not remove, the screw with the top keyhole opening last (second from the top).
A |
|
B | C |
A.Dryer
B.Do not remove
C.Dryer door
2.Lift and pull forward on the door so that the keyhole clears the screw head. Remove the door.
3.Lay the dryer door on a flat, protected surface with the inside door assembly facing up. Remove the last screw from Step 1. Remove the 2 screws holding the handle to the door.
4.Remove the 6 screws to release the outer door assembly from the inner door assembly (see illustration). It is important that you remove only the 6 indicated screws.
5.Lift the inner door assembly off of the outer door assembly. Unsnap the handle from the outer door assembly, move it to the other side, and snap in. Set the outer door assembly aside.
Reverse the hinge and hinge bracket
1.Place the inner door, screw head side up, on the work surface.
2.Remove the 4 screws that hold the hinge to the door.
3.Remove the 2 screws that hold the handle bracket to the door.
17
