4
INSTALLATION
REQUIREMENTS
Too l s a n d P a rt s
IMPORTANT:
■Observe all governing codes and ordinances.
■Installer: Leave Installation Instructions with the
homeowner.
■Homeowner: Keep Installation Instructions for future
reference. Save these Installation Instructions for the local
electrical inspector’s use.
■Keep cardboard shipping piece or plywood under
refrigerator until it is installed in the operating position.
■Comply with installation specifications and dimensions.
■Remove any moldings or decorative panels that prevent
the refrigerator from being serviced.
■Contact a qualified electrical installer.
■Order factory panels, make custom panels, or consult a
qualified cabinet maker or carpenter to make panels.
Tools needed:
Make sure that you have the tools necessary for proper
installation:
Parts needed:
■Your refrigerator dealer has a kit available with a ¹⁄₄ in.
(6.35 mm) saddle-type shutoff valve, a union, and copper
tubing
■¹⁄₄ in. (6.35 mm) copper tubing with shutoff valve
■¹⁄₄ in. (6.35 mm) compression fitting
■6 - #8 x 3 in . (7.6 cm) wood screws (longer screws may be
needed)
■1 or 2 - 2 in. x 4 in. x 32 in. (5 cm x 10 cm x 81cm) wood
board(s)
■Custom panels (provided by homeowner)
Product Dimensions
Side View (All models)
1. 25
¹⁄₈
in. (64 cm) dimension is to front of top grille
2. Power cord (24 in. [61 cm])
3. 5 ft. (1.5 m) water line tubing taped to back
NOTE: (*) Dimensions shown are for leg levelers extended ¹⁄₈ in.
(3 mm) below rollers. For levelers fully extended 1¹⁄₄ in. (32 mm)
below rollers, add 1¹⁄₈ in. (29 mm) to this dimension.
Top View (All models)
■Hand drill or electric drill
(properly grounded)
■⁷⁄₁₆ in. and ¹⁄₂ in. open-end
wrenches
■Drill bits ■¹⁄₄ in. nut driver
■Two adjustable wrenches ■⁵⁄₃₂ in. Allen wrench
■Phillips screwdriver ■⁵⁄₁₆ in. socket wrench
Model Width A
36 in. (91 cm)
42 in. (106 cm)
48 in. (122 cm)
35 in. (89 cm)
41 in. (104 cm)
47 in. (119 cm)
251
/
8"
(64 cm)
3
2
1
231
/
2"
(60 cm)
24"
(61 cm)
831
/
8"
(211 cm)*
31
/
2" (9 cm)*
25
1
/
8
"
(64 cm)
A