Countertop mounting, Installation | KitchenAid INTEGRATED COMPACTOR

2.Use pliers to lower leveling legs away from cabinet. Adjust legs so there will be a ¹⁄₈" (3 mm) to ¹₄ " (6.4 mm) space between the top of the compactor and the top of the cabinet opening. Stand the compactor upright.

3.For model with cabinet, remove the plastic plugs from the compactor cabinet top.

4.Move the compactor close to its final position.

5.Plug into a grounded 3 prong outlet.

6.Determine if you want the compactor frame or drawer front flush with the cabinet front.

Using the two #8-18 x ⁵₁₆ " screws, install the retaining brackets to cabinet top as needed:

■If the compactor frame is to be flush with the cabinet front, place retaining bracket screws through “1.”

■If the compactor drawer front is to be flush with the cabinet front, place retaining bracket screws through “3.”

■If the compactor is to be midway between “1” and “3,” place the retaining bracket screws through “2.”

3 2 1

A.Countertop

B.Retaining bracket

7.Slowly lift the front slightly and roll compactor into the cabinet opening.

Using the two #8-18 x ¹₂ " screws, fasten the retaining brackets to the countertop with the mounting screws.

If brackets cannot be attached to the underside of countertop, attach mounting clips to brackets. Fasten compactor to cabinet front with mounting screws through mounting clips.

Countertop mounting

A.Countertop

B.Retaining bracket

C.Mounting screw

Cabinet-front mounting

A C

A. Mounting clip	C. Retaining bracket
B. Cabinet	D. Mounting screw

8.Grasp sides of compactor drawer and place bottom of drawer into tracks. Lift at the handle so drawer will go over drawer stops. Close drawer. Check to see if drawer opens freely. If the toe plate rubs against floor, see “Adjusting the Toe Plate” for further instructions.

Adjusting the Toe Plate

If the toe plate rubs the floor covering, the toe plate clearance may be changed as follows:

1.Mark on each side of the toe plate the amount of toe plate that rubs the floor covering.

2.Remove the drawer from the unit. (See Step 3 in the “Unpacking” section.)

3.Use a ruler and a pencil or chalk to draw a line between the marks on each side of toe plate.

4.Use scissors or utility knife to cut toe plate along line.

5.Replace drawer. If toe plate still rubs floor covering, repeat Steps 1-4.

Installing a Custom Panel

Dimensions

Use these dimension drawings to create a custom panel for use without a trim kit. The panel should be a minimum of ¹⁄₂" (13 mm) thick.

29 ³⁄₈"

(74.6 cm)

15" (38.1 cm)

Installation

1.Align the bottom of the custom panel with the bottom of the drawer front.

NOTE: The bottom of the custom panel should not extend below the bottomof the drawer front.

2.Secure the panel from the back using four #8 x 1" wood screws as shown.

INTEGRATED COMPACTOR specifications

The KitchenAid Integrated Compactor is a versatile and innovative appliance designed to streamline waste management in the kitchen. This compact yet powerful device offers a modern solution for households seeking to reduce clutter and improve efficiency. With its sleek design, the compactor seamlessly integrates into cabinetry, maintaining the aesthetic appeal of any kitchen while providing convenience at your fingertips.

One of the standout features of the KitchenAid Integrated Compactor is its powerful compression capability. It boasts a strong motor that compresses waste by up to 75%, significantly reducing the volume of trash generated. This means fewer trips to the outdoor garbage bin and a more organized kitchen environment. The compactor accommodates various types of waste, including food scraps, packaging, and other refuse, making it an essential addition for any kitchen.

The user-friendly controls of the KitchenAid Integrated Compactor make it easy to operate. With a simple push of a button, users can activate the compaction cycle, which runs quietly and efficiently. The compactor also includes an automatic start feature, ensuring it operates when the door is closed, adding to its ease of use.

Moreover, this integrated compactor is designed with advanced safety features. The door is equipped with a child lock mechanism, preventing accidental opening and ensuring the safety of busy kitchens. The design also includes a clean touch control panel, which is easy to wipe down and maintain, providing an added layer of hygiene.

In terms of design and finish, the KitchenAid Integrated Compactor is available in various colors and styles to match different kitchen decors. Its built-in installation allows it to blend seamlessly with surrounding cabinetry, making it a perfect fit for modern homes.

Additionally, the appliance is engineered for efficiency, with energy-saving features that allow it to consume less power while providing exceptional performance. The compactor also features a filter system that reduces odors, keeping your kitchen smelling fresh.

In conclusion, the KitchenAid Integrated Compactor is a perfect marriage of functionality and aesthetics. It offers a space-saving solution for waste management, advanced technologies that ensure effective operation, and a sleek design that enhances any kitchen's look. With its array of features and emphasis on ease of use and safety, this compactor is an invaluable asset for today's eco-conscious households.

KitchenAid INTEGRATED COMPACTOR manual Countertop mounting, Cabinet-front mounting, Installation

Models: INTEGRATED COMPACTOR