KitchenAid KBDS100T dimensions Food-Waste Disposer, Product Model Number, Overall Dimensions

® Food-Waste Disposer

PRODUCT MODEL NUMBER

KBDS100T

Electrical: This disposer is intended to be direct-wired to the electrical supply. If junction box is used, connect the junction box to the switch on a separate 15- or 20-amp 115 Volt circuit with the appropriate cable. (Use 14 gauge wire with

15-amp circuit, and 12 gauge wire with 20-amp circuit.) This disposer requires a switch marked "Off" position (wired to disconnect all ungrounded supply conductors) installed within sight of the disposer sink opening. (1 hp minimum rating.)

OVERALL DIMENSIONS

A

F

E

B

D

C

A. 9" (22.9 cm)

B. 12-3/4" (30.5 cm)

C. 5-3/4" (14.6 cm)

D. 4" (10.2 cm)

E. 6-11/16" (17.0 cm)

F. Dishwasher drain connection

Installations on thicker sinks (such as solid surface, porcelain, or cast iron) may require the use of alternate parts. Measure existing mounting assembly as shown in figure A or measure sink thickness as shown in figure B, to determine whether an extended sink flange must be ordered.

7/8”

3/4”

AB

Because Whirlpool Corporation policy includes a continuous commitment to improve our products, we reserve the right to change materials and specifications without notice.

Dimensions are for planning purposes only. For complete details, see Installation	Ref. W10118056
Instructions packed with product. Specifications subject to change without notice.	10-12-07