KitchenAid dimensions French Door Refrigerator, Product Model Numbers, KFCO22EVKFCS22EV

Models: KFCO22EV KFCS22EV

1 1
Download 1 pages 4.98 Kb
Page 1
Image 1
French Door Refrigerator

French Door Refrigerator

PRODUCT MODEL NUMBERS

KFCO22EVKFCS22EV

Electrical Requirements: A 115 Volt, 60 Hz.,

AC only 15- or 20-amp fused, grounded electrical supply is required. It is recommended that a separate circuit serving only your refrigerator be provided. Use an outlet that cannot be turned off by a switch. Do not use an extension cord, 2-prong adapter or power strip.

NOTE: Before performing any type of installation, cleaning or removing a light bulb, turn Cooling OFF, and then disconnect the refrigerator from the electrical source. When you are finished, reconnect the refrigerator to the electrical source and turn Cooling ON.

Water Supply Requirements: Connect the ice maker to a cold water line with water pressure between 35 and 120 psi (241 and 827 kPa).

IMPORTANT: The pressure of the water coming out of a reverse osmosis system going to the water inlet valve of the refrigerator needs to be between 35 and 120 psi (241 and 827 kPa).

If a reverse osmosis water filtration system is connected to your cold water supply, the water pressure to the system needs to be a minimum of approximately 40 to 60 psi (276 to 414 kPa).

PRODUCT DIMENSIONS

B

 

A

 

 

not incl.

 

 

handle

 

 

E

 

C

incl.

D

handle

top of

 

overall

cabinet

 

 

Model #

Depth

Cab. Width

Cab. Height

Overall Height

Depth

 

"A"

"B"

"C"

"D"

"E"

KFCO22EV

27-5/8"

35-5/8"

70-7/8"

71-7/8"

30-1/8"

 

(70.17 cm)

(90.49 cm)

(180.02 cm)

(182.56 cm)

(76.52 cm)

KFCS22EV

27-5/8"

35-5/8"

70-7/8"

71-7/8"

30-1/8"

 

(70.17 cm)

(90.49 cm)

(180.02 cm)

(182.56 cm)

(76.52 cm)

 

 

 

 

 

 

LOCATION REQUIREMENTS

1/2"

(1.25 cm) PRODUCT MODEL NUMBERS

To ensure proper ventilation for your refrigerator, allow for a 1/2" (1.25 cm) space at the top and behind the refrigerator. If your refrigerator has an ice maker, allow extra space at the back for the water line connections. When installing your refrigerator next to a fixed wall, leave 2-1/2" (6.3 cm) minimum on both sides (some models require more) to allow for the doors to swing open.

NOTE: It is recommended that you do not install the refrigerator near an oven, radiator, or other heat source. Do not install the refrigerator in a location where the temperature will fall below 55°F (13°C).

2-1/2" (6.3 cm)

Because Whirlpool Corporation policy includes a continuous commitment to improve our products, we reserve the right to change materials and specifications without notice.

Dimensions are for planning purposes only. For complete details, see Installation

Ref. 12828187

Instructions packed with product. Specifications subject to change without notice.

07-01-08

Page 1
Image 1
KitchenAid dimensions French Door Refrigerator, Product Model Numbers, KFCO22EVKFCS22EV, Product Dimensions