KitchenAid KGCP487JSS dimensions Pro Line Gas Cooktop, Gas and Electric Connection Locations

	®	Pro Line™ Gas Cooktop
PRODUCT MODEL NUMBERS			OVERALL DIMENSIONS
KGCP462KSS	KGCP482KSS			backguard (shown)
KGCP463KSS	KGCP483KSS		36" (91.4 cm) cooktop with	or island trim
KGCP467JSS	KGCP484KSS		all sealed burners shown
KGCP467JTL	KGCP487JSS
			36" (91.4 cm) long
			3-prong ground-type
Gas supply: Cooktop is equipped for use with			power supply cord	9" (22.9 cm)
NATURAL gas. Cooktop can be converted to L.P.				KGCP487JSS
gas. Gas supply line of 3/4" rigid pipe to cooktop				6" (15.2 cm)
location. If local codes permit, a new AGA or CSA
design-certified, 4-5 foot (1.2-1.5 m) long, 1/2" or				7-1/2" (19.1 cm)
3/4" I.D., flexible metal appliance connector is
recommended for connecting cooktop to gas
supply line. Pressure regulator has 3/8" female				26-1/4" (66.7 cm)
pipe threads. The supply line shall be equipped
with an approved shutoff valve.			36" (91.4 cm) cooktop: 35-7/8" (91.1 cm)
Electrical: Electrical: 120-volt, 60-Hz, AC-only,			48" (121.9 cm) cooktop: 47-7/8" (121.6 cm)
15-amp. electrical supply. Use copper wire only. A				26-1/4" (66.7 cm)
time-delay fuse or circuit breaker and separate				gas inlet is located 1-7/8"
circuit is recommended.				(4.8 cm) from back of burner		9"
It is recommended that an overhead vent hood be				box and	3/8"
				4-7/8" (12.4 cm) in from L.H.	(9.5 mm)	(22.9 cm)
used with this cooktop. For island installations, a			side view	side of burner box
48" (122 cm) hood is recommended.			of cooktop
Cooktop location should be away from strong draft					7-1/8"
areas, such as windows, doors and strong heating					(18.1 cm)
vents or fans.			7/8"
			(22.2 mm)
			2-3/16"	22" (55.9 cm)	1-3/16"
			(55.6 mm)
CABINET OPENING DIMENSIONS					(30.2 mm)

3-prong ground-type outlet should be located on left hand side of cutout 8" (20.3 cm) max. from enclosure sidewall.

10" (25.4 cm)	14"
	(35.6 cm)

Note: Solid side and bottom of cutout enclosure not shown.

		A			B (min.)	C	D	E
						backguard	cabinet and
size	model	island trim	backguard	island trim	backguard	opening	countertop	countertop only
36" (91.4 cm)	KGCP462K	5"	1-3/4"	48" (121.9 cm)		36"	35-1/4"	36" (91.4 cm) or
	KGCP463K	(12.7 cm)	(4.4 cm)			(91.4 cm)	(89.5 cm)	35-7/8" (91.1 cm)
	KGCP467J			49" (124.5 cm)				for zero clearance fit
				non-combustible surface
48" (121.9 cm)	KGCP482K	6"	1-3/4"	48"	49"	48"	47-1/4"	48" (121.9 cm) or
		(15.2 cm)	(4.4 cm)	(121.9 cm)	(124.5 cm)	(121.9 cm)	(120.0 cm)	47-7/8" (121.6 cm)
								for zero clearance fit
	KGCP483K	5"			48"
		(12.7 cm)			(121.9 cm)
	KGCP484K	6" (15.2 cm)
	KGCP487J	5"	5"	48" (121.9 cm)
		(12.7 cm)	(12.7 cm)	non-combustible surface

Note: Dimension "B" can be reduced by 6" (15.2 cm) when bottom of wood or metal cabinet is protected by not less than 0.25" (6.4 mm) flame retardant millboard covered with not less than No. 28 MSG sheet steel, 0.015" (0.4 mm) stainless steel,0.024" (0.6 mm) aluminum or 0.020" (0.5 mm) copper.

Gas supply line should be located in this area on rear or side walls, or the supply line can come up through the floor.

Gas and Electric

Connection Locations

notch to be equal
both sides.	D

7-1/4"

(18.4 cm)

E

CORNER NOTCH

DETAIL

C

	13" (33 cm) max.
	upper cabinet depth
18" (45.7 cm) min.
clearance upper
cabinet to countertop
	C
		A	B min.
	3/4" (1.9 cm)
see corner	22-1/4"
notch detail	(56.5 cm)
	6-7/8" (16.1 cm)
	4-3/4"
	(12.1 cm)
		12-5/16" (31.3 cm)
	2"	min. clearance to
		side wall -
	(5.1 cm)		24"
		both sides
			(61 cm)
	D
			base cabinet

E

Because Whirlpool Corporation policy includes a continuous commitment to improve our products, we reserve the right to change materials and specifications without notice.

Dimensions are for planning purposes only. For complete details, see Installation	Ref. 8284979
Instructions packed with product. Specifications subject to change without notice.	02-28-02