KitchenAid KHWL160P dimensions Hot Water Dispenser, Product Model Number, Overall Dimensions

Models: KHWC160P KHWG160P KHWL160P

1 1
Download 1 pages 48.38 Kb
Page 1
Image 1
 ® Hot Water Dispenser

PRODUCT MODEL NUMBERKHWC160PKHWL160POVERALL DIMENSIONSImportant: Observe all governing codes and ordinances.Spout installed in spray hoseIf spout is not to beinstalled in sink spray hoseopening in sink.opening, cut a 1-3/8"(3.5 cm) dia. sink or ® Hot Water Dispenser

PRODUCT MODEL NUMBER

KHWC160PKHWL160P

KHWG160P

Electrical: A 120-volt, 60 Hz, AC-only 15 or 20 amp fused, grounded electrical supply is required. It is recommended that a separate circuit serving only your hot water dispenser be provided. Use an outlet that cannot be turned on/off by a switch.

Water supply requirements: If local codes permit, the hot water dispenser feed line should be connected to the cold water supply line using a saddle tapping valve.

Important: If local codes do not permit the use of saddle valves, special feed valves can be obtained from your local plumbing supply distributor.

If a filter system is used, the water pressure to the dispenser should not drop below 20 psi (138 kPa).

OVERALL DIMENSIONS

Important: Observe all governing codes and ordinances.countertop cutout

Spout installed in spray hose
If spout is not to be
installed in sink spray hose
opening in sink.
opening, cut a 1-3/8"

 

(3.5 cm) dia. sink or

 

countertop cutout
Cold water supply line

Tank must be mounted vertically.

1-3/4" (4.4 cm) max. countertop or sink thickness
42" (106.7 cm) max. — electrical outlet to hot water dispenser tank.
11-1/8"

(28.3 cm)

7-7/8"6-7/8"
(20.0 cm)(17.5 cm)
Saddle valve

Because Whirlpool Corporation policy includes a continuous commitment to improve our products, we reserve the right to change materials and specifications without notice.

Dimensions are for planning purposes only. For complete details, see Installation

Ref. 8578898

Instructions packed with product. Specifications subject to change without notice.

03-31-06
Page 1
Image 1
KitchenAid dimensions Hot Water Dispenser, Product Model Number, KHWC160PKHWL160P KHWG160P, Overall Dimensions, 7-7/8