30" (76.2 CM) AND 36" (91.4 CM) ELECTRIC INDUCTION COOKTOP

PRODUCT MODEL NUMBERS

KICU509X KICU569X

ELECTRICAL REQUIREMENTS:

Before You Make the Electrical Connection:

To properly install your cooktop, you must determine the type of electrical connection you will be using and follow the instructions provided for it here.

●A 4-wire or 3-wire, single phase, 240 volt, 60 Hz., AC only electrical supply is required on a separate, 50-amp circuit (36" [91.4 cm] models) or 40-amp circuit (30" [76.2 cm] models), fused on both sides of the line.

●The cooktop should be connected directly to the junction box through flexible, armored or nonmetallic sheathed, copper cable. The flexible, armored cable extending from the fuse box or circuit breaker box should be connected directly to the junction box.

●Locate the junction box to allow as much slack as possible between the junction box and the cooktop so that the cooktop can be moved if servicing becomes necessary in the future.

●Do not cut the conduit. The length of conduit provided is for serviceability of the cooktop.

●A UL listed or CSA approved conduit connector must be provided at each end of the power supply cable (at the cooktop and at the junction box). A listed conduit connector is already provided at the cooktop.

●If the house has aluminum wiring, follow the procedure below:

1.Connect a section of solid copper wire to the pigtail leads.

2.Connect the aluminum wiring to the added section of copper wire using special connectors and/or tools designed and UL listed for joining copper to aluminum.

Follow the electrical connector manufacturer's recommended procedure. Aluminum/copper connection must conform with local codes and industry accepted wiring practices.

PRODUCT DIMENSIONS

 

 

Model JIC4430

 

Model KICU509

 

A. 21B\zn" (54.1 cm)

 

A. 21B\zn" (54.1 cm)

 

B. 30B\zn" (77.0 cm)

 

B. 30C\v" (78.2 cm)

 

C. 3Z\," (8.0 cm)

 

C. 3Z\," (8.0 cm)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CABINET DIMENSIONS

IMPORTANT: If installing a range hood or microwave hood combination above the range, follow the range hood or microwave hood combination installation instructions for dimensional clearances above the cooktop surface.

Models JIC4536 and KICU569

A. 21B\zn" (54.1 cm)

B. 36B\zn" (92.0 cm)

C. 3Z\," (8.0 cm)

NOTES: After you make the countertop cutout, some installations may require notching down the base cabinet side walls to clear the cooktop base. To avoid this modification, use a base cabinet with sidewalls wider than the cutout.

If cabinet has a drawer, a 5Z\," (13 cm) depth clearance from the countertop to the top of the drawer (or other obstruction) in base cabinet is required.

Because Whirlpool Corporation policy includes a continuous commitment to improve our products, we reserve the right to change materials and specifications without notice.

Dimensions are for planning purposes only. For complete details, see Installation

Ref. 501961902036B

Instructions packed with product. Specifications subject to change without notice.

4/21/11

Page 1 Page 1
Page 1
Image 1
KitchenAid KICU509X KICU569X dimensions 30 76.2 CM and 36 91.4 CM Electric Induction Cooktop, Model JIC4430 Model KICU509
Page 1 Page 1

KICU509X KICU569X specifications

The KitchenAid KICU509X and KICU569X are two exemplary models of kitchen appliances designed to elevate cooking experiences with their advanced features and innovative technologies. Both models are an ideal choice for culinary enthusiasts who prioritize performance, style, and functionality.

The KICU509X model showcases a sleek and modern design that fits seamlessly into any kitchen aesthetic. This induction cooktop features five cooking zones, offering ample space for multiple pots and pans. The powerful induction technology heats cookware directly, providing precise temperature control and exceptional cooking efficiency. With the ability to instantly adjust heat levels, users can achieve the perfect sear or gentle simmer, making it suitable for a range of recipes from delicate sauces to hearty stews.

Equipped with a PowerBoost feature, the KICU509X can rapidly increase heat for boiling water and quickly cooking ingredients. This is particularly beneficial for time-sensitive recipes, allowing home chefs to optimize their cooking process. Additionally, the model includes a Warm surface indicator, ensuring safety by alerting users if the cooktop is still hot after use.

On the other hand, the KICU569X model offers similar capabilities but comes with an added focus on flexibility and convenience. This appliance features a FlexiInduction zone that allows users to combine two cooking zones into one larger area, accommodating larger cookware and ensuring versatility in meal preparation. The sleek glass surface not only contributes to its modern look but is also easy to clean, making maintenance a breeze.

Furthermore, both models benefit from a range of intuitive controls, including touch-sensitive buttons, which provide users with a smooth and responsive cooking experience. The timers and precise temperature settings make it easy for users to manage their cooking processes effectively. Safety features such as automatic shut-off and child lock add peace of mind for families.

Overall, the KitchenAid KICU509X and KICU569X stand out in the market for their combination of style, innovative technology, and user-friendly features. These induction cooktops not only enhance the cooking experience but also streamline kitchen tasks, making them a worthwhile investment for any modern kitchen. Whether for a busy family or an aspiring chef, these models deliver quality performance and elevate the culinary journey.
Top Page Image Contents