KitchenAid KUDS01FK Canceling a Cycle, Changing a Cycle or Setting, Adding Items During a Cycle

		Use this rinse cycle
		for rinsing dishes,
		glasses, and
		silverware that will not		Do not use
		be washed right away.		detergent with this
				cycle.
Pre-	Rinse	Main Rinse	Final	Dry	Time	Water
Wash		Wash	Heated		(min)	Usage
			Rinse			(gal/L)
		●			10	1.8/7

†A small amount of water is run through the pump to remove soil particles between the main wash and final rinse.

Canceling a Cycle

1.Carefully open the door slightly to stop the cycle. Wait for the spraying action to stop before opening the door to access the control panel.

2.Press

Cancel

Cancel glows.

3.Close the door. The dishwasher starts a 2 minute drain (if needed). Let the dishwasher drain completely.

To stop the drain

You can press CANCEL again to stop the drain. Remember to drain the dishwasher before starting a new cycle.

To clear the indicators

Press CANCEL before starting the dishwasher to clear all options and cycles.

Changing a Cycle or Setting

During the first minute of a cycle

1.Open the door.

2.Press a new cycle and/or options.

3.Check the detergent dispensers. They must be filled properly for the new cycle.

4.Close the door. The dishwasher resumes the new cycle and/or option after a 5 second pause.

After the first minute of a cycle

1.Carefully open the door slightly to stop the cycle. Wait for the spraying action to stop before opening the door to access the control panel.

2.Press

5.Press START.

6.Check the detergent dispensers. They must be filled properly for the new cycle.

7.Close the door.

Adding Items During a Cycle

You can add an item anytime before the main wash starts. Open the door and check the detergent dispenser. If the cover is still closed, you can add items.

To add items

1.Carefully open the door slightly to stop the cycle. Wait for the spraying action to stop before opening the door.

2.Open the door. If the detergent dispenser cover is still closed, add the item.

3.Close the door firmly until it latches. The dishwasher resumes the cycle after about a 5 second pause.

Option Selections

You can customize your cycles by pressing an option. If you change your mind, press the option again to turn the option off. Select a different option if desired.

You can change an option anytime before the selected option begins. For example, you can press an unheated drying option any time before drying begins.

Press START to repeat the same cycle and options as the previous wash cycle.

NOTE: If the last cycle you completed was a rinse cycle, when you press Start, the dishwasher runs the last full wash cycle and options.

Hi-Temp Scrub

Select this option to heat the water during parts of the cycle, and add a rinse. Higher water temperatures and an extra rinse helps clean tough soils. Hi-Temp Scrub, with the Heavy cycle, raises the water temperature in the prewash and main wash. Hi-Temp Scrub, with the Normal cycle, raises the water temperature in the main wash.

This option adds heat, water and wash time to a cycle.

NOTE: Hi-Temp Scrub is an option with the Heavy and Normal cycles.

ENERGY SAVER™ Dry System

Select this option to dry dishes without heat and save energy. ENERGY SAVER™ Dry System is useful when loads contain plastic dinnerware that may be sensitive to high temperatures.

Cancel

Cancel glows.

3.Close the door. Your dishwasher starts a 2 minute drain (if needed). Let the dishwasher drain completely.

4.Select a new cycle and/or options.

The dishes take longer to dry and some spotting can occur. For best drying, use a liquid rinse aid. Some items (such as plastics) may need towel drying.

NOTE: Rinse Only automatically uses this option. ENERGY SAVER™ Dry System is an option with all other cycles.

11