30" (76.2 cm) and 36" (91.4 cm) Wall-Mount Canopy Range Hood

PRODUCT MODEL NUMBERS

KXW4330Y KXW4336Y

Electrical Requirements:

A 120 volt, 60 Hz., AC only, 15-amp, fused electrical circuit is required.

If the house has aluminum wiring, follow the procedure below:

1.Connect a section of solid copper wire to the pigtail leads.

2.Connect the aluminum wiring to the added section of copper wire using special connectors and/or tools designed and UL listed for joining copper to aluminum.

Follow the electrical connector manufacturer's recommended procedure. Aluminum/copper connection must conform with local codes and industry accepted wiring practices.

CABINET OPENING DIMENSIONS

10" (25.4 cm) min. 13" (33.0 cm) max.

2" (5.1 cm) min.

9" (22.9 cm) min.* 9¹⁄₂" (24.1 cm)

 

 

 

 

 

 

 

 

Vent and power

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

10" (25.4

cm) min.

 

 

 

 

 

 

 

 

 

 

supply cable

13" (33.0

cm) max.

 

 

 

 

 

entry location

 

 

 

 

 

 

17" (43.2 cm)*

Side

 

 

 

 

 

Side

cabinet

 

 

 

 

 

cabinet

30" (76.2 cm) or 36" (91.4 cm)

"X"

bottom of

canopy

to cooking surface

Centerline

Cooking surface

*For non-vented (recirculating) installations

IMPORTANT:

Minimum distance “X”: 24" (61.0 cm) from electric cooking surface.

Minimum distance “X”: 27" (68.6 cm) from gas cooking surfaces.

Suggested maximum distance “X”: 36" (91.4 cm)

The chimneys can be adjusted for different ceiling heights. See the following chart.

Vented Installations

 

Min. ceiling height

Max. ceiling height

Electric cooking surface

7' 1" (2.16 m)

9' 2" (2.79 m)

Gas cooking surface

7' 4" (2.23 m)

9' 2" (2.79 m)

Non-vented (recirculating) Installations

 

Min. ceiling height

Max. ceiling height

Electric cooking surface

7' 1" (2.16 m)

9' 6" (2.9 m)

Gas cooking surface

7' 4" (2.23 m)

9' 6" (2.9 m)

NOTE: The range hood chimneys are adjustable and designed to meet varying ceiling or soffit heights depending on the distance “X” between the bottom of the range hood and the cooking surface. For higher ceilings, a Stainless Steel Chimney Extension Kit Part Number W10272075 is available from your dealer or an authorized parts distributor. The chimney extension replaces the chimney shipped with the range hood.

PRODUCT DIMENSIONS

10¾" (27.3 cm)

3³⁄₈" (8.6 cm)

5⁷⁄₈" (15.0 cm)

13³⁄₁₆" (33.5 cm)

*28⁵⁄₁₆" (71.9 cm) min.

42⁵⁄₈" (108.3 cm) max.

 

24"

 

(60.8 cm)

 

17¹¹⁄₁₆"

 

(45 cm)

 

**24⁵⁄₈" (62.5 cm) min.

 

38¾" (98.4 cm) max.

30" (76.2 cm)

 

36" (91.4 cm)

5"

 

(12.7 cm)

 

19¹¹⁄₁₆" (50.0 cm)

*For non-vented (recirculating) installation **For vented installations

VENTING REQUIREMENTS

Vent system must terminate to the outdoors, except for non-vented (recirculating) installations.

Do not terminate the vent system in an attic or other enclosed area.

Do not use 4" (10.2 cm) laundry-type wall cap.

Use metal vent only. Rigid metal vent is recommended. Plastic or metal foil vent is not recommended.

The length of vent system and number of elbows should be kept to a minimum to provide efficient performance.

For the most efficient and quiet operation:

Use no more than three 90° elbows.

Make sure there is a minimum of 24" (61.0 cm) of straight vent between the elbows if more than 1 elbow is used.

Do not install 2 elbows together.

Use clamps to seal all joints in the vent system.

The vent system must have a damper. If the roof or wall cap has a damper, do not use the damper supplied with the range hood.

Use caulking to seal exterior wall or roof opening around the cap.

The size of the vent should be uniform.

Cold Weather Installations

An additional back draft damper should be installed to minimize backward cold air flow and a thermal break should be installed to minimize conduction of outside temperatures as part of the vent system. The damper should be on the cold air side of the thermal break.

The break should be as close as possible to where the vent system enters the heated portion of the house.

Makeup Air

Local building codes may require the use of make up air systems when using ventilation systems greater than specified CFM of air movement. The specified CFM varies from locale to locale. Consult your HVAC professional for specific requirements in your area.

Page 1 of 2

Because Whirlpool Corporation policy includes a continuous commitment to improve our products, we reserve the right to change materials and specifications without notice.

Dimensions are for planning purposes only. For complete details, see Installation

Ref. W10320584C

Instructions packed with product. Specifications subject to change without notice.

2/8/12

Page 1
Image 1
KitchenAid KXW4330Y, KXW4336Y specifications Product Model Numbers, Cabinet Opening Dimensions, Product Dimensions

KXW4336Y, KXW4330Y specifications

The KitchenAid KXW4330Y and KXW4336Y range hoods are sleek and efficient kitchen appliances that not only enhance the aesthetics of any kitchen but also play a vital role in ensuring a clean and healthy cooking environment. Both models are designed with modern households in mind, offering a powerful combination of advanced features, innovative technologies, and user-friendly characteristics.

One of the standout features of the KXW4330Y and KXW4336Y is their powerful ventilation system, which is engineered to effectively eliminate smoke, odors, and grease from the kitchen. With adjustable fan speeds, users can choose to optimize airflow based on their cooking needs. The quiet operation of these range hoods means that you can enjoy a pleasant cooking experience without overwhelming noise, making it ideal for open-concept spaces.

Additionally, both models are equipped with high-quality LED lighting that provides ample illumination over the cooking area. This feature enhances visibility during meal preparation while also adding a touch of modern elegance to the kitchen. The energy-efficient LED lights contribute to a reduction in electricity costs, making them both environmentally and economically friendly.

In terms of design, the KitchenAid KXW4330Y and KXW4336Y showcase a professional-grade stainless steel finish that offers durability and style. Their wall-mounted configurations allow them to fit seamlessly into various kitchen layouts. The clean lines and contemporary design make these range hoods a perfect fit for both traditional and modern aesthetics.

An important characteristic of these models is their ease of use and maintenance. The dishwasher-safe baffle filters are designed to trap grease and particulates efficiently, ensuring that the air in your kitchen remains fresh. The filters are easy to remove and can be cleaned in a dishwasher, promoting hassle-free maintenance.

Moreover, advanced technologies such as the Auto On feature automatically detects cooking heat and turns the hood on, ensuring optimal ventilation every time you cook. This intelligent design not only enhances user convenience but also promotes energy efficiency.

In summary, the KitchenAid KXW4330Y and KXW4336Y range hoods are exceptional choices for homeowners seeking a blend of style, performance, and convenience in their kitchen ventilation. With powerful ventilation, efficient LED lighting, and user-friendly maintenance, these range hoods stand out as premium options that elevate both cooking functionality and kitchen aesthetics.