Manuals / KitchenAid / Kitchen Appliance / Range

KitchenAid W10044930B Gas Supply Line, Gas Pressure Regulator, Burner Input Rating Altitude

Models: W10044930B

1 16
Download 16 pages 33.48 Kb
Page 7
Image 7

Gas Supply Line

■Provide a gas supply line of ¾" (1.9 cm) rigid pipe to the range location. A smaller size pipe on longer runs may result in insufficient gas supply. Pipe-joint compounds that resist the action of LP gas must be used. Do not use TEFLON®† tape. With LP gas, piping or tubing size can be ½" (1.3 cm) minimum. Usually, LP gas suppliers determine the size and materials used in the system.

Flexible metal appliance connector:

■If local codes permit, a new CSA design-certified, 4 - 5 ft (122 - 152.4 cm) long, ⁵⁄₈" (1.6 cm) or

¾" (1.9 cm) I.D., flexible metal appliance connector may be used for connecting range to the gas supply line.

Gas Pressure Regulator

The gas pressure regulator supplied with this range must be used. The inlet pressure to the regulator should be as follows for proper operation:

Natural Gas:

Minimum pressure: 6" (15.2 cm) WCP

Maximum pressure: 14" (35.6 cm) WCP

LP Gas:

Minimum pressure: 11" (27.9 cm) WCP

Maximum pressure: 14" (35.6 cm) WCP

Contact local gas supplier if you are not sure about the inlet pressure.

■A ½" (1.3 cm) male pipe thread is needed for connection to the female pipe threads of the inlet to the range pressure regulator.

■Do not kink or damage the flexible metal tubing when moving the range.

Rigid pipe connection:

The rigid pipe connection requires a combination of pipe fittings to obtain an in-line connection to the range. The rigid pipe must be level with the range connection. All strains must be removed from the supply and fuel lines so range will be level and in line.

■Must include a manual shutoff valve:

The supply line must be equipped with a manual shutoff valve. This valve should be located in the same room but external to the range. It should be in a location that allows ease of opening and closing. Do not block access to shutoff valve. The valve is for turning on or shutting off gas to the range.

B

A

C

A. Gas supply line

B. Shutoff valve “open” position

C. To range

†®TEFLON is a registered trademark of E.I. Du Pont De Nemours and Company.

Burner Input Rating - Altitude

Input ratings shown on the model/serial rating plate are for elevations up to 2,000 ft (609.6 m).

For elevations above 2,000 ft (609.6 m), ratings are reduced at a rate of 4% for each 1,000 ft (304.8 m).

Gas Supply Pressure Testing

Line pressure testing above ½ psi gauge (14" WCP)

The range and its individual shutoff valve must be disconnected from the gas supply piping system during any pressure testing of that system at test pressures in excess of ½ psi (3.5 kPa).

Line pressure testing at ½ psi gauge (14" WCP) or lower

The range must be isolated from the gas supply piping system by closing its individual manual shutoff valve during any pressure testing of the gas supply piping system at test pressures equal to or less than ½ psi (3.5 kPa).

7

Page 6 Page 8
Page 7
Image 7
KitchenAid W10044930B Gas Supply Line, Gas Pressure Regulator, Burner Input Rating Altitude, Gas Supply Pressure Testing
Page 6 Page 8

W10044930B specifications

The KitchenAid W10044930B is a versatile and highly efficient appliance that serves as a reliable addition to any modern kitchen. Primarily designed as a replacement part—specifically, a dishwasher lower spray arm—it embodies KitchenAid's commitment to quality, durability, and innovative technology.

One of the standout features of the W10044930B is its robust construction. Made from high-grade materials, this spray arm is engineered to withstand the rigors of daily use, ensuring longevity and consistent performance. The design of the spray arm optimally distributes water across the dishwasher's interior, allowing for effective cleaning of dishes, pots, and pans regardless of their placement within the appliance.

Technologically, the W10044930B demonstrates KitchenAid's advanced engineering. The lower spray arm is designed with multiple spray jets that enhance water coverage, ensuring each dish receives sufficient cleaning power. This feature significantly reduces the need for pre-rinsing, making washing dishes more efficient and eco-friendly. The spray arm operates at varying pressures, which adjusts based on the soil level of the items being washed, further optimizing water and energy consumption.

In terms of compatibility, the KitchenAid W10044930B is designed to fit a wide array of KitchenAid dishwasher models, making it a versatile replacement option for homeowners. Installation is straightforward, enabling users to replace a damaged spray arm without requiring professional assistance. This user-friendly aspect is a hallmark of KitchenAid’s design philosophy, which prioritizes ease of use alongside high performance.

Additionally, the W10044930B is part of KitchenAid’s focus on sustainability. By maintaining a strong cleaning performance while minimizing water usage, this product contributes to a more responsible approach to home cleaning practices.

Overall, the KitchenAid W10044930B lower spray arm is a testament to the brand's dedication to innovation and quality. With its durable construction, advanced cleaning technology, and compatibility across multiple models, it ensures that users enjoy a superior dishwashing experience, making it an essential component for maintaining cleanliness and efficiency in the kitchen. Whether addressing the needs of a busy family or a gourmet chef, the W10044930B stands out as a prime example of KitchenAid's commitment to excellence.