IMPORTANT SAFETY INSTRUCTIONS

WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING:

■Use this unit only in the manner intended by the manufacturer. If you have questions, contact the manufacturer.

■Before servicing or cleaning the unit, switch power off at service panel and lock the service disconnecting means to prevent power from being switched on accidentally. When the service disconnecting means cannot be locked, securely fasten a prominent warning device, such as a tag, to the service panel.

■Installation work and electrical wiring must be done by qualified person(s) in accordance with all applicable codes and standards, including fire-rated construction.

■Do not operate any fan with a damaged cord or plug. Discard fan or return to an authorized service facility for examination and/or repair.

■Sufficient air is needed for proper combustion and exhausting of gases through the flue (chimney) of fuel burning equipment to prevent backdrafting. Follow the heating equipment manufacturer's guideline and safety standards such as those published by the National Fire Protection Association (NFPA), the American Society for Heating, Refrigeration and Air Conditioning Engineers (ASHRAE), and the local code authorities.

■When cutting or drilling into wall or ceiling; do not damage electrical wiring and other utilities.

■Ducted fans must always be vented outdoors.

CAUTION: For general ventilating use only. Do not use to exhaust hazardous or explosive materials and vapors. CAUTION: To reduce risk of fire and to properly exhaust air, be sure to duct air outside - do not vent exhaust air into spaces within walls or ceilings, attics or into crawl spaces, or garages.

WARNING: TO REDUCE THE RISK OF FIRE, USE ONLY METAL DUCTWORK.

WARNING: TO REDUCE THE RISK OF A RANGE TOP GREASE FIRE:

■Never leave surface units unattended at high settings. Boilovers cause smoking and greasy spillovers that may ignite. Heat oils slowly on low or medium settings.

■Always turn hood ON when cooking at high heat or when flambeing food (i.e. Crepes Suzette, Cherries Jubilee, Peppercorn Beef Flambé).

■Clean ventilating fans frequently. Grease should not be allowed to accumulate on fan or filter.

■Use proper pan size. Always use cookware appropriate for the size of the surface element.

WARNING: TO REDUCE THE RISK OF INJURY TO PERSONS IN THE EVENT OF A RANGE TOP GREASE FIRE, OBSERVE THE FOLLOWING:a

■SMOTHER FLAMES with a close fitting lid, cookie sheet, or metal tray, then turn off the burner. BE CAREFUL TO PREVENT BURNS. If the flames do not go out immediately, EVACUATE AND CALL THE FIRE DEPARTMENT.

■NEVER PICK UP A FLAMING PAN - you may be burned.

■DO NOT USE WATER, including wet dishcloths or towels - a violent steam explosion will result.

■Use an extinguisher ONLY if:

–You know you have a class ABC extinguisher, and you already know how to operate it.

–The fire is small and contained in the area where it started.

–The fire department is being called.

–You can fight the fire with your back to an exit.

aBased on "Kitchen Fire Safety Tips" published by NFPA.

■WARNING: To reduce the risk of fire or electrical shock, do not use this fan with any solid-state speed control device.

READ AND SAVE THESE INSTRUCTIONS

3

Page 2 Page 4
Page 3
Image 3
KitchenAid LI3Y7C, W10322991C installation instructions Important Safety Instructions
Page 2 Page 4

LI3Y7C, W10322991C specifications

The KitchenAid W10322991C, LI3Y7C is an exceptional addition to any home kitchen, celebrated for its combination of functionality, durability, and innovative technology. This specific model stands out for its versatility and user-friendly design, making it an ideal choice for both amateur cooks and professional chefs alike.

One of the main features of the KitchenAid W10322991C is its impressive motor performance. Engineered to handle even the most challenging recipes, the powerful motor ensures consistency in mixing and kneading. This feature is particularly important for baking enthusiasts who require precise measurements and thorough ingredient incorporation to achieve the perfect dough and batter textures.

In terms of build quality, the W10322991C model boasts a robust construction using high-grade materials. This durability not only enhances the mixer’s lifespan but also contributes to its stability during operation. The design features a weighted base that minimizes vibrations, allowing for a noiseless experience in the kitchen.

A standout technology incorporated into this model is the planetary mixing action. This allows the mixing attachment to rotate in one direction while the bowl rotates in the opposite direction, ensuring that all ingredients are thoroughly combined. This efficient mixing method guarantees that no ingredient is left unmixed, delivering an even consistency in every preparation.

The KitchenAid W10322991C also comes with multiple speed settings, allowing users to select the ideal speed for any task – from gentle mixing to high-speed whipping. Additionally, the inclusion of various attachments such as a flat beater, wire whip, and dough hook further expands the machine’s capabilities, enabling users to tackle a wide range of culinary tasks.

Another characteristic that enhances user convenience is the tilting head design. This feature allows for easy access to the bowl, making it simpler to add ingredients or switch attachments without any hassle. Coupled with a generous bowl capacity, this design is particularly beneficial for larger batches or intricate recipes.

In conclusion, the KitchenAid W10322991C, LI3Y7C is a powerhouse of a kitchen appliance combining efficiency, durability, and ease of use. With its advanced mixing technologies, robust construction, and versatile functions, it empowers users to explore their culinary creativity, making it a staple in kitchens around the world. Whether baking bread, mixing cookie dough, or preparing whipped cream, this model ensures outstanding results every time.
Top Page Image Contents