Klaxon 102325 To Flashguard XL PLus, Installation Instructions Flashguard LED Flasher Module

Installation Instructions

Flashguard LED Flasher Module

To Flashguard XL PLus

1.Straighten the two LEDs by gently bending them in to the the upright position.

2.Fix the board to the cut-out inside the cover using the self-ashesive pads provided. Screws can be used if desired.

3.	Connect the unit to a
	suitable 12V supply,
	observing polarity. The
	two LEDs will now
	flash alternately.
4.	Fix the unit to the wall
	in the same way as an
	ordinary simulated unit.
		PCB

È

È

È

È

Part No. 102325

The Installers Choice