Klaxon 18-980181 General, Installation, Operation, Testing and Maintenance

1. General

Klaxalarm is a primary battery (LR14 C Cells qty 6) operated self-contained fire alarm. The intended use is for protection of small or temporary buildings.

The Terrier Klaxalarm incorporates a re-settable manual call point and an electronic sounder with a choice of three tones. The products may be interlinked with a 3 core cable so that if one unit is activated all the other units will sound simultaneously. Additional Manual Call Points can also be connected to the units.

2. Installation

Use three screws at the rear of the Klaxalarm (not supplied)

3. Operation, Testing and Maintenance

The unit is ready for operation as soon as the battery is connected. The unit should be periodically tested for correct operation.

To test the alarm, simply press the centre of the transparent plastic window of the call point. The alarm should sound and a yellow indicator appears in the window to show that the call point has been activated.

The unit is reset after an alarm or test by inserting the black plastic key in the slot on the front of the unit and turning clockwise. The yellow indicator disappears when the unit has reset.

Each unit will operate in the standby mode for over twelve months. A low battery warning beep is emitted when the battery starts to fail. Ensure the battery is replaced promptly to ensure continued protection.