Figure 2

SPEAKER INSTALLATION(for New Construction, skip to step #3)

1.Cut the appropriate size opening in the wall or ceiling using the template provided. If the template is not available, cutout dimensions are provided on the Klipsch website, www.klipsch.com. Sizes listed are minimum. If accuracy of cut cannot be achieved, you may add 1/4" to each dimension. Be careful not to cut through any existing wiring or plumbing. Avoid compromising any fire stops between studs.

2.Run speaker wiring (18 gauge minimum) to the openings. Be sure to comply with all building codes in your area.

3.Attach the wire to the speaker using the wire’s color coding or markings as a guide to maintain proper polarity.

4.Insert the speaker assembly into the opening and attach by tightening the four Phillips screws (figure 3). The frame’s “dog” legs will swivel out and “sandwich” the wall and frame together. (Klipsch new construction brackets make this simple if used prior to drywall installation.)

5.At this point, you may paint the speaker grilles before inserting them into the speakers. Klipsch grilles are designed to accept most types of paint. You may wish to remove the scrim material before painting. It may be reinserted after the paint is dry. Care should be taken to avoid excessive paint build-up in the grille perforations.

6.Press the grille into place.

See back page for more illustrations.

OPERATING CONTROLS

Mid-Bass and Tweeter Attenuator Switch (3000 and 5000 Series)

Some models feature a Tweeter switch (3000 series) or both a Mid-Bass and a Tweeter switch (5000 series) located on the front baffle. The switch allows a setting of either 0dB (normal) or –3dB in the respective frequency range. If installing in an acoustically bright room, such as a bathroom or kitchen, you may want to adjust the Tweeter level switch. If the speaker is located in a corner and produces too much bass, you may need to adjust the Mid-Bass level switch. The position of the switch should always be checked prior to attaching the grille.

Pivoting Horn (In-Wall Models)

The 3000 and 5000 series feature a pivoting horn that allows the horn to be toed-in. Before the grille is installed, carefully aim the horn toward the listening area.

Swiveling Horn Tweeter (In-Ceiling Models)

Klipsch Reference in-ceiling models (3000 and 5000 Series) feature a swiveling tweeter to aim the high frequencies. To aim sound directly at the listening area, gently adjust the horn to the desired angle before the grille is installed.

Do not attempt to turn the tweeter stem while adjusting the swivel tweeter.

Infrared Sensor Mount (In-Wall Models)

All Reference model in-wall speakers feature a 1/2’’ infrared sensor locator on the baffle.

WARRANTY–U.S. AND CANADA ONLY

The Warranty below is valid only for sales to consumers in the United States or Canada.

Figure 3

Page 2 Page 4
Page 3
Image 3
Klipsch ARCHITECTURAL SPEAKERS manual Operating Controls, Mid-Bass and Tweeter Attenuator Switch 3000 and 5000 Series
Page 2 Page 4

ARCHITECTURAL SPEAKERS specifications

Klipsch ARCHITECTURAL SPEAKERS are designed to blend seamlessly into your living spaces while delivering exceptional sound quality. These speakers are a perfect choice for homeowners who want to enjoy high-fidelity audio without compromising on aesthetics. With a variety of models available, Klipsch offers solutions for every room and setup, whether you’re looking for in-wall, in-ceiling, or outdoor speakers.

One of the standout features of Klipsch ARCHITECTURAL SPEAKERS is their proprietary Tractrix Horn technology. This technology enhances clarity and detail by controlling the directivity of the high-frequency sounds. By focusing the sound, Tractrix Horns allow for a more efficient and accurate audio experience, providing listeners with an immersive soundstage that brings music and movies to life.

Another key characteristic of these speakers is their robust build quality. Klipsch uses high-quality materials, including durable woofers and tweeters, to ensure longevity and superior sound reproduction. Many of the ARCHITECTURAL models also come with paintable grilles, allowing homeowners to match the speaker’s appearance with their interior decor. This flexibility ensures that these speakers can complement any room's design while providing top-notch audio performance.

The speakers also feature a wide frequency response range, allowing them to reproduce both the low, rich tones of music and the higher frequencies that bring vocals and instruments to life. This allows listeners to experience the full spectrum of sound, whether listening to classical symphonies or modern hip-hop.

Installation is made easy with Klipsch's user-friendly design. Most speakers come with a simple cut-out template and installation guides, making the process straightforward for both professionals and DIY enthusiasts. This efficient setup enables homeowners to achieve a clean, unobtrusive look in their spaces.

Ultimately, Klipsch ARCHITECTURAL SPEAKERS provide an ideal solution for those seeking high-end audio without the bulkiness of traditional speakers. With cutting-edge technology, aesthetic versatility, and exceptional craftsmanship, Klipsch stands at the forefront of modern sound solutions, ensuring a remarkable auditory experience for any environment. Whether you’re a serious audiophile or simply someone who appreciates good sound, Klipsch ARCHITECTURAL SPEAKERS will elevate your listening experience to new heights.
Top Page Image Contents