In-Wall LCR Loudspeaker
KL-6502-THX
The KL-6502-THX delivers effortless dynamic range and brings superior sound to larger areas thanks to its highly regarded THX Select2 certification.
•THX Select2-certified for superior sound
•Horn-loaded for high efficiency and low distortion
•Easily mounts horizontally or vertically
•Maximum installation reliability
•Mix and match with our other THX products
It employs dual 5.25-inch woven fiberglass woofers for amazingly accurate sound, as well as a titanium tweeter mated to an exclusive Tractrix® Horn for flat in-room frequency response with high efficiency and low distortion. The speaker’s precision- voiced crossover networks further ensure that the high and low frequencies are faith- fully reproduced.
This in-wall speaker also consistently deliv- ers thrilling, realistic sound, whether it’s installed horizontally or vertically. It fea- tures all-new sure-grip mounting dogs that provide even pressure against drywall for long-term installation reliability, and includes a paintable grille that blends in perfectly with any décor.
Furthermore, the KL-6502-THX offers unlimited flexibility. It is timbre matched to all of our THX-certified products, so you can mix and match to create an unbeatable, discreet stereo or home theater system that’s just right for you.
S p e c i f i c a t i o n s
Frequency response | 46Hz-20kHz +/-3dB |
| |
Power handling | 100W continuous / 400W peak |
| |
Recommended amplifier power | 150W |
| |
Sensitivity | 92dB @ 2.83V / 1m |
| |
Nominal impedance | 8 ohms compatible |
| |
High frequency drivers | 1” (2.5cm) Titanium diaphragm |
| compression driver mated to |
| 90° x 90° square Tractrix® Horn |
| |
High freq crossover | 2100Hz & 1200Hz |
| |
Low frequency drivers | Dual 5.25” (13.3cm) high-output, |
| fiberglass cone woofers |
| |
Enclosure material | MDF & Aluminum motorboard / |
| ABS frame |
| |
Enclosure type | Infinite baffle, front flush with wall |
| |
Dimensions | 17.75” (45.1cm) H x 8” (20.3cm) W |
| |
Mounting depth | 3.75” (9.5cm) |
| |
Cutout dimensions | 16.5” (41.9cm) H x 6.5” (16.5cm) W |
| |
Installation kit | IK-502-W (sold seperately) |
| |
Weight | 9.6lbs (4.4kg) |
| |
Finishes | White paintable frame and grille |
www.klipsch.com 1-800-KLIPSCH All specifications are subject to change without notice. ©2008
