Dual 4'' Two-Way Center-Channel Satellite Loudspeaker

The RCX-4 is a low-profile, horizontally oriented center channel loudspeaker. Although designed primarily to work with the RSX-4 and RSX-5 Reference Satellites, which it matches perfectly both cosmetically and sonically, the RCX-4’s sound also blends well with that of other Klipsch loudspeakers, allowing maximum flexibility in system configuration. Its gracefully contoured, high-rigidity enclosure fits easily on any television set, or it can be shelf-, wall-, or ceiling-mounted. An integrated ball-joint pedestal stand with bottom keyholes makes it easy to place the RCX-4 on any convenient surface and direct its sound into the listening area.

High frequencies emanate from a 1-inch titanium dome compression driver tweeter. The round MicroTractrix™ Horn molded into the front of the cast aluminum baffle raises the driver’s efficiency and controls its radiation pattern to minimize detail-blurring reflections from walls, floor, and ceiling. Flanking the tweeter are twin 4-inch Cerametallic™cone woofers operating as a Tapered Array. Klipsch Tapered Array™ Technology operates both woofers at the lowest frequencies and only one all the way up to the point where the tweeter takes over, eliminating the destructive middle-frequency interference between woofer outputs characteristic of ordinary woofer-tweeter-woofer lineups. Low- frequency response extends deep enough to mesh seamlessly with the crossovers built into A/V receivers, surround processors, and powered subwoofers. All drivers are magnetically shielded to prevent interference with direct-view television sets. As in all Reference Series loudspeakers, premium crossover components ensure optimum signal transfer.

Because of its high power-handling capability and unusually high sensitivity, the RCX-4 can sustain significantly higher output than most similar-size center speakers. And though ideally suited for use with other Klipsch loudspeakers, it will provide excellent center channel sound in any system.

RCX-4

■Very high sensitivity

■MicroTractrix Horn tweeter for clean, detailed highs

■Dual Cerametallic cone woofers in a Tapered Array configuration to maximize clarity

■Ball-joint pedestal stand with keyholes allows easy placement

■Magnetically shielded to prevent video interference

S P E C I F I C A T I O N S

BANDWIDTH

92Hz-20kHz ± 3dB

SENSITIVITY

94dB @ 2.83 volts/1 meter

NOMINAL IMPEDANCE

8 ohms compatible

CROSSOVER FREQUENCY

2100Hz

POWER HANDLING

75 watts (300 watts peak)

ENCLOSURE TYPE

Bass reflex via dual rear-firing ports

DRIVE COMPONENTS

Two-way system using one 1'' (2.5cm)

 

magnetically shielded, titanium dome

 

compression driver tweeter with an integral

 

round 90˚ MircroTractix Horn and two 4''

 

(10.2cm) magnetically shielded, Cerametallic

 

cone woofers

WEIGHT

7.5 lbs. (3.4kg) including base

HEIGHT

7.5" (19cm) including base, 5.4" w/out base

WIDTH

14.8" (37.6cm)

DEPTH

8.4" (21.3cm)

FINISH

Black or Silver

MOUNTING

Base swivels 360˚ for on-wall mounting via

 

keyholes

www.klipsch.com 1-800-KLIPSCH

All specifications are subject to change without notice. ©2004

Page 1
Image 1
Klipsch RCX-4 specifications Dual 4 Two-Way Center-Channel Satellite Loudspeaker, Specification S