Klipsch SWS manual S W S

Power Switch Options (Fig.5)	Phase Switch 0/180 (Fig.5)	P ro M e d i a ® S ub wo ofe r Sys tem
On the SWS subwoofer’s back panel is	This control is used to acoustically
		S W S
a power switch with three positions:	match the subwoofer’s output to your
OFF, ON, and AUTO-ON. If you select	main speakers. You want to select one
AUTO-ON, the SWS will turn itself on	of the two positions, either 0 or 108,
when it detects an audio signal at one	in which your sub has more output at
of its inputs and off after a period has	your listening position.
elapsed with no input signal. You
probably will want to leave the switch	You’re done! Enjoy your new Klipsch
set to AUTO-ON most of the time.	ProMedia SWS subwoofer.
Crossover-Frequency and
Level Adjustment (Fig.5)
On the back of SWS is a switch
labeled FREQUENCY, which adjusts
the crossover frequency between 60
and 90 Hz. Only signals below the
selected frequency will be reproduced
by the SWS. You will need to adjust
the FREQUENCY control and the SWS
volume control to achieve a pleasing
balance of bass to higher sounds.