support could be a fishing leader attached to the U bracket and wall.
Connect the speaker wires to the gold binding posts. Polarity is very important as wrong polarity will give lousy sound quality and especially poor bass.
Secure the speaker to the U bracket with the threaded knobs. Aim the speakers to the correct angle, then
Mounting using aftermarket brackets
More precise aiming of the OUT650 can be accomplished by using ball joint and other aftermarket mount systems. Dual ¼”- 20 brass inserts are fitted into the OUT650 for aftermarket brackets.
¼” – 20 brass fittings for aftermarket brackets
gold 5-way binding post plates
NEVER use pliers or power tools to tighten the knobs.
Speaker Specifications
OUT650 |
|
Speaker Design: | Indoor/outdoor bass reflex ABS plastic |
| speaker system, weather resistant design. |
Tweeter: | 1"(25mm) silk dome, with neodymium |
| magnet and wave guide. |
Woofer: | |
| rubber surround. |
Frequency Response: 50Hz to 20kHz ± 3dB | |
Impedance: | 8Ω |
Power Handling: | 5 to 120 watts |
Efficiency: | 90dB @ 1W/m |
Grills: | Powder coated aluminum |
Dimensions: | 12" H, 8 ½" W, 7 ¾" D |
Weight (each): | 7.95 lbs (3.6 kg) |
Speaker Warranty
Knoll Systems warrants its speakers sold in the USA and Canada by authorized Knoll dealers to be free of defects in materials and workmanship. This warranty extends for five full years from the date of purchase by the original consumer. Any products returned to Knoll Systems and found to be defective by Knoll Systems within the warranty period will be repaired or replaced at Knoll Systems option, at no charge. Knoll Systems will not be responsible for the actual cost of installation or removal of the product, nor for any incidental or consequential damages. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation may not apply to you. This warranty gives you specific legal rights. You may have additional legal rights that vary from
Technical Assistance and Service
The Technical Assistance Department at Knoll is available at 604
In the event that your unit should need repair or service you may return the unit to your authorized dealer or use the following guidelines:
1)Be prepared to state the model number and or serial number, date of purchase and dealers name and address when calling.
2)Contact Knoll directly at 604
4)The original packaging must be used. If the original packaging is not available, replacements can be obtained from Knoll for a small fee or you can use other packaging so long as product damage from shipping will not occur.
5)Ship the product via United Parcel Service, Federal Express.
6)Print the return authorization number on the outside of the box.
7)Ship to:
Attn: Technical Assistance Department Knoll Systems
145 Tyee Drive
Point Roberts WA 98281
Or
Knoll Systems
11791 Machrina Way, #110
Richmond BC Canada V7A 4V3
8)FREIGHT COLLECT SHIPMENTS WILL BE REFUSED! You are responsible for the freight charges when returning product. If the unit is found to have a warranty problem we will pay the return freight charges.