Cleaning Stainless Oil Tunnel, Baffle Filters and Spacers
CAUTION: DRAIN OIL BEFORE RESIDUE CAN OVERFLOW.
1.Remove the baffle filter (reverse the order of baffle installation).
2.Carefully remove oil tunnel.
3.Discard oil and residue.
4.Wash oil tunnel, baffle filters and spacers with warm soapy water.
5.Dry thoroughly and put back.
NOTE: Oil Tunnel, baffle filters and spacers are top rack dishwasher safe.
Replacing Light Bulb
CAUTION: HALOGEN LIGHT UNIT MAY BE HOT! WAIT UNTIL UNIT IS COOL.
|
| |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1.Make sure all controls are OFF, and range hood is unplugged.
2.Place a
3.Gently remove light cover from housing .
4.Gently pull out the defective light bulb and discard. Light bulb should be 12V 20W maximum.
5.Wear a glove or use a cloth to hold new light bulb and push gently but securely into light socket. NOTE: DO NOT PUSH TOO HARD OR YOU MAY BREAK THE BULB CONNECTOR.
6.Put back light cover .
7.Plug back power cord and turn on range hood to test for operation.
15
