- INSTALLING THE RANGE HOOD -
(Keep all packing materials for return or exchange)
Temporarily wire the hood to test for proper operation before installing.
Before installing, please peel protective film off the hood first, if
NOTE: The recommended distance from range hood bottom to top of the cooking s between 28 ~ 30.
{Fig. 1a} | {Fig. 1b} |
WARNING: As the hood is heavy, we strongly recommend using all 8 moun holes to install the hood. Installation may require more than 1 perso
For Mounting on a Cabinet with a Flush Bottom
1)If you need to move the cooking range to work on the cabinet, turn off t electric range at the main electrical box. SHUT OFF THE GAS BEFORE MOVING A RANGE.
2)To make an electrical line access opening, please refer to section Elect Access.
3)Use 1 wood screws for mounting the hood. Puncture the eight indented mou
Measure & create access opening for electrical wires under the cabinet.
4)
a)For top venting: Cut rectangle opening required… X for10 6duct, .7 orRemove3 temporary plastic vent cover on the top of the hood. Replace with the pl exhaust vent piece that came with the hood. Cut along the indented outlin the duct opening that you need. {Fig. 2} Fasten plastic multi duct exh with the raised surface facing outward back onto the top of the hood. (See
{Fig. 2} 7 Multi Duct Exhaust Base6 (included)
(Remove) Temporary vent cover
5
