Kobe Range Hoods CH8136SQ manual Slide the entire duct cover onto the hood. Refer to Figure

Models: CH8136SQ

1 21
Download 21 pages 25.5 Kb
Page 9
Image 9

10.Using referenceEfrom Table 1 and measurements on page 12, mark the leveling poi for duct cover bracket.

11.Secure the duct cover bracket to the wall with two screws (not provided). Ma screws are tightened. NOTE: Inner duct cover will cover the duct cover bracke

12.Adjust the duct cover length and secure with two (4x8 mm) screws (provided) a Figure 8.

13.Remove the two (4x14 mm) screws (provided) on the duct cover position plate.

14.Slide the entire duct cover onto the hood. Refer to Figure 9.

Figure 8

15.Place the edge of the inner duct cover behind the duct cover bracket on the w

16.Secure the outer duct cover to the duct cover position plate with two (4x14 m (provided).

Install Accessories

17.If oil container (round) is detached, place the oil container (round) into ke each safety screen. Turn clock-wise until firmly in place. Refer to Figure 1

18.Slide oil container (oval) into plastic slot behind each safety screen as sho

Figure 10

Final Assembly

19.Turn power ON in control panel. Check all lights and fan operation.

20.Make sure to leave this manual for the homeowner.

7

Page 9
Image 9
Kobe Range Hoods CH8136SQ manual Slide the entire duct cover onto the hood. Refer to Figure