Wiring to Power Supply

Figure 4

SAFETY WARNING

RISK OF ELECTRICAL SHOCK. THIS RANGE HOOD MUST BE PROPERLY GROUNDED. MAKE SURE THIS IS DONE BY QUALIFIED ELECTRICIAN IN ACCORDANCE WITH ALL APPLICABLE NATIONAL AND LOCAL ELECTRICAL CODES. BEFORE CONNECTING WIRES, SWITCH POWER OFF AT SERVICE PANEL AND LOCK SERVICE PANEL TO PREVENT POWER FROM BEING SWITCHED ON ACCIDENTALLY.

9.Temporarily wire the hood to test for proper operation before installing. If the insert does not operate, check the circuit breaker or house fuse. If the insert is still not working, disconnect the power supply and check the continuity of all wiring connections.

10. Connect electrical wires.

Figure 5

11.Connect three wires (black, white and green) to house wires and cap with wire connectors. Connect wires according to their colors (i.e. black to black, white to white, and green to green). See Figure 3.

12.Store wires in the wiring box.

13.Determine the proper location for the Power Supply Cable. Make a wiring access hole using a drill bit. Install the wire cable and seal the gap around hole. Note: Connect all electrical wires before installing insert. DO NOT turn on the power until installation is complete.

Duct Work Installation

14.Use 6” steel pipe (follow building codes in your area) to connect the ducting on the hood to the ductwork above. Use duct tape to seal and secure joints as shown in Figure 4.

15.Please refer to local codes for the usage of the damper

(included). If necessary, remove the damper mechanism and install as exhaust connector.

Hood Preparation Before Installation

CAUTION: If moving the cooking range is necessary to install the hood, turn off the power in an electric range at the main electrical box. SHUT OFF THE GAS BEFORE MOVING A GAS RANGE.

16.Determine and mark the centerlines on the base of the wood frame where the insert will be installed.

17.Determine and make all necessary cuts in the wall or ceiling for the ductwork. Note: Install the duct work before installing the insert.

18.Cut out the opening where the insert will be installed. (Figure 5)

6

Page 8
Image 8
Kobe Range Hoods IN2730SF installation instructions Wiring to Power Supply

IN2730SF specifications

The Kobe Range Hoods IN2730SF is a standout appliance designed for modern kitchens, offering a blend of advanced technology, sleek aesthetics, and unmatched performance. Known for their commitment to quality and innovation, Kobe has created this model to meet the demands of both professional chefs and home cooking enthusiasts alike.

One of the key features of the IN2730SF is its powerful 900 CFM blower. This high-performance blower ensures exceptional ventilation, efficiently eliminating smoke, odors, and grease from your kitchen. Whether you're simmering sauces or searing meats, this range hood is equipped to handle thick, greasy air, keeping your kitchen fresh and clean. The adjustable speed settings allow users to customize airflow based on cooking needs, further enhancing its versatility.

The design of the IN2730SF embodies sophistication and style, featuring a stainless steel finish that complements a wide range of kitchen decors. Its sleek under-cabinet design saves space while providing a stunning focal point. Additionally, the 30-inch width fits standard cooktops perfectly, making it a practical choice for any kitchen layout.

Another standout characteristic is the unit's noise reduction technology. Kobe incorporates a unique “quiet mode” that minimizes operational sound, allowing for a more pleasant cooking experience. Even at high speeds, the unit operates at competitive noise levels, ensuring that conversations can continue unhindered in the kitchen.

The IN2730SF is also designed for ease of use and maintenance. The baffle filters are dishwasher safe, making cleaning effortless and minimizing upkeep. Moreover, the range hood features LED lighting, providing bright illumination over your cooking area while being energy efficient.

In terms of technological advancements, the IN2730SF includes a convenient remote control, allowing you to adjust speed and lighting settings without having to reach for the hood directly. The intuitive controls add to the user-friendly experience, catering to both seasoned cooks and those who are new to the kitchen.

Overall, the Kobe Range Hoods IN2730SF is an investment in quality and performance. Its combination of powerful ventilation, stylish design, and innovative technology makes it a must-have appliance for any kitchen, elevating both functionality and aesthetics. Whether you’re entertaining guests or enjoying a quiet meal at home, this range hood enhances the cooking experience while ensuring a fresh and pleasant environment.