Cleaning imaging guides and camera
glass covers
Release the fastening clips on the imaging guide and remove it from the scanner. Clean both sides with a Staticide wipe. Then wipe the guide with a
Camera cover glass
Locate the camera glass cover between and below the LED lamps. Clean it with a dry swab. Do not use solvents when cleaning the camera glass.
Reinsert the imaging guide into the scanner.
When finished, clean the bottom imaging guide and bottom camera cover glass.
Ngenuity Operator Utility
When cleaning is finished, reset the maintenance reminder by clicking the link on the Maintenance monitor.
Supplies and Accessories
CAT No. | Description |
182 9779 | Small Roller Kit with Feeder Pre- |
| separation Pad |
121 1515 | Medium Roller Kit with Feeder Pre- |
| separation Pad |
119 5460 | Large Roller Kit with Feeder Pre- |
| separation Pad |
175 0462 | Ultralight Feeder Kit - for use with |
| feeder and |
853 5981 | Kodak Digital Science Roller Cleaning |
| Pads |
896 5519 | Staticide Wipes for Kodak Scanners |
179 7158 | Blower Brush |
162 0640 | Imaging Guide Assembly |
199 8103 | Calibration Kit (contains Calibration |
| Sheet 5K0449) |
802 9654 | Straight |
896 1955 | Front/Rear Printer Kit - Accessory |
155 8667 | Printer Kit Cartridge |
EASTMAN KODAK COMPANY
343 State Street
Rochester, New York 14650 U.S.A.
© Eastman Kodak Company, 2011
TM: Kodak
Ngenuity 9000 Series Scanners
Reference Guide
Kodak Service & Support
www.kodak.com/go/disupport
1.800.822.1414
(US&C only; all other regions, contact your local Kodak Support Center) www.kodak.com/go/dicontacts
When contacting support, have the following available:
•A description of your problem
•Scanner model and serial number
•Computer configuration
•Software application you are using
