Troubleshooting

www.kodak.com/go/support 45

Camera ready light status
High camera
temperature. (Camera
will be turned off.)
Internal temperature of
the camera is too high for
the camera to operate.
The viewfinder light glows
red and the camera turns
off.
Leave the camera off until it’s cool
to the touch, then turn it back on.
If the message reappears, contact
Customer Support (page 48).
Unrecognized file
format
Camera cannot read the
picture format.
Transfer the picture to the
computer (page14), or delete it
(page12).
Camera error #XXXX.
See user’s guide.
An error is detected. Turn the Mode dial off, then back
on. If the message reappears,
contact Customer Support
(page48).
Status Cause Solution
Ready light does not
turn on and the
camera does not
work.
Camera is not turned on. Turn on the camera (page 2).
Batteries are exhausted
or are not charged.
Install new batteries (page 1) or
charge rechargeable batteries.
Mode dial was on when
batteries were reloaded.
Turn Mode dial off, then back on.
Ready light blinks
green.
Picture is being
processed and saved to
the camera.
Camera is operating normally.
Ready light blinks
amber.
Flash is not charged. Wait. Resume picture taking when
the light stops blinking and turns
green.
Camera is initializing.
Message Cause Solution