December 1994
CURRENT INFORMATION SUMMARY
Opening Instructions for the
KODAK MAX Waterproof
Wear eye protection when opening all cameras.
1 Remove Wind Knob |
•Ensure film is completely wound off.
•Insert tool end as shown and pry WIND KNOB off.
•Remove the black
2 Remove Back Cover (a) |
•Insert special tool into rectangular hole of
PULL TAB.
3 Remove Back Cover (b) |
• Pry up on PULL TAB to initiate opening.
CAUTION: To avoid tool slippage, be sure tool is fully engaged with the camera body before attempting opening task.
4 Remove Back Cover (c) |
•Carefully pull up each side of the REAR HOUSING cover until it is completely removed.
5 Remove Back Cover (d) |
•To remove the camera, the REAR HOUSING cover must be completely removed.
6 Remove Camera from Casing |
•Tap the FRONT HOUSING cover on a hard surface to loosen the camera.
•Remove the camera from the housing.
•Remove the film in the same way as typical Fun Saver 35 cameras.
• | Place in recycle bin. |
7 • | Return to Kodak for recycling. |
©Eastman Kodak Company, 1996
