Notes Technical

Display

Problem

 

Solution

 

 

 

NEW CITY IS IN THE

Destination

in same

No need to change time zones if desti-

72

 

CURRENT TIME ZONE

time zone as home.

 

nation is in same time zone as home.

 

 

 

 

 

INITIALIZING LENS

 

 

 

 

Wait until message has cleared from

 

 

 

CANNOT FOCUS

Camera cannot focus.

display and camera has zoomed all

 

—

 

 

 

 

 

the way out.

 

 

 

 

 

 

 

 

 

Turn camera off and then on again. If

 

 

 

LENS ERROR

Lens error.

 

 

 

error persists, contact retailer or Nikon

14

 

 

 

 

 

 

representative.

 

 

 

 

 

Finger or other obstruc-

Turn camera off and remove obstruc-

 

 

 

LENS COVER ERROR

tion prevents lens cover

tion.

 

2, 14

 

from opening.

 

 

 

 

 

 

 

USB cable disconnected

If PictureProject displays error, click

 

 

 

 

OK to exit. Resume operation after

52–53,

 

during transfer or print-

turning camera off and reconnecting

56

 

COMMUNICATIONS ERROR

ing.

 

 

 

cable.

 

 

 

 

 

USB option incorrect.

Choose correct USB option.

54

 

 

PictureProject

did

not

See the PictureProject reference man-

 

—

 

start.

 

 

 

ual (on CD) for more information.

 

 

 

 

 

 

 

 

NO IMAGES ARE MARKED

No pictures selected for

Select pictures

for transfer and try

68

 

FOR TRANSFER

transfer.

 

 

 

again.

 

 

 

 

 

 

 

 

 

TRANSFER ERROR

Transfer error.

 

 

• Check battery level.

14

 

 

 

• Check that USB cable is connected.

52–53

 

 

 

 

 

 

Error has

occurred

in

Turn camera off, remove and reinsert

 

 

 

SYSTEM ERROR

camera’s

internal

cir-

batteries, and turn camera on. If error

10

 

 

cuitry.

 

 

 

persists, contact retailer or Nikon rep-

 

 

 

 

 

 

 

resentative.

 

 

 

 

 

 

 

 

 

 

 

 

 

PRINTER ERROR

 

 

 

 

Check printer.

To resume, highlight

 

 

 

Printer error.

 

 

Resume (if available) and press

 

—

CHECK PRINTER STATUS

 

 

 

 

 

 

 

 

button.

 

 

 

 

Electronically Controlled Cameras

In extremely rare instances, unusual characters may appear in the monitor and the camera may stop functioning. In most cases, this phenomenon is caused by a strong external static charge. Turn the camera off, remove and replace the batteries, and then turn the camera on again. In the event of continued malfunction, contact your retailer or Nikon representative. Note that disconnecting the power source as described above may result in the loss of any data not recorded to internal memory or the memory card at the time the problem occurred. Data already recorded will not be affected.

82