ENGLISH
TAKING PICTURES
4
Set up the picture function using the LCD panel and the LCD monitor.
For details of shooting function on the LCD monitor, please refer to page 27~37
5
You can compose your picture by using the viewfinder or the LCD monitor.
In macro mode, you should compose your picture composition using the LCD monitor.
Note
Extensive use of the LCD monitor to review the potential picture will drain the batteries in a short
period of time. To safeguard against this, please use the Viewfinder.
Reference
If there is insufficient memory available
To check the status of the remaining card memory, turn mode dial to record or motion mode. If
the card is full, the message "CARD FULL" and "0" will appear in the LCD monitorand LCD
panel respectively.
To extend the amount of memory on the camera, replace the SmartMediaTMcard or delete
unnecessary images stored on the SmartMediaTMcard.
6
When taking pictures, press the shutter button gently to avoid camera shake.
Press the shutter button down halfway, you will see the AF LED is blinking and the autofocus will be
activated.
Pressing the shutter button down fully, will take a picture and the data regarding the picture will be
stored. The LCD counter display will reduce by one and the auto focus LED will stop flashing.