Kodak ECP-2D manual Table of Contents

Note: While the data presented are typical of production coatings, they do not represent standards which must be met by Kodak. Varying storage, exposure, and processing conditions will affect results. The company reserves the right to change and improve characteristics at any time.

Table of Contents
KODAK VISION Color Print Control Strips	2
Introduction	2
Processed Control Strip - 35 mm	2
Important Improvements	2
Control Strip Sensitometric Curve Comparison	3
ECP-2D Control Strip Exposed on EASTMAN EXR Color Print Film / 5386	4
ECP-2D Control Strip Exposed on KODAK VISION Color Print Film / 2383	5
Effects of Mechanical and Chemical Variations	6
Effects of Time and Temperature Variations	7
Effects of pH and CD-2 Variations	8
Effects of NaBr and Na2CO3 Variations	9
Effects of Na2SO3 Variations	10
Effects of AF-9 and PB-2 Prebath Contamination	11
Effects of CD-3 for CD-2 and Stop Bath Contamination	12
Effects of Persulfate Accelerator and Hydroxylamine Sulfate Contamination 13
Effects of F-35B Fixer and NaCl Contamination	14
Effects of KI Contamination and Water Dilution	15
Effects of Bacterial Na2S and Na2SO4 Contamination	16
Effects of Under- and Over-Replenishment	17
Control-Strip Crossover	18
Control-Strip Crossover for Process ECP-2D	19
Crossover to Non-Prebath Process Sequence	20

KODAK VISION Color Print Control Strips, Process ECP-2D 1